Manage Autonomous DEM Mobile Users

Learn how to monitor and manage your registered Autonomous DEM mobile users.
Use the following steps to begin monitoring your mobile users’ digital experiences with ADEM:
  1. Enable ADEM for your Prisma Access mobile users.
    ADEM is supported for your Prisma Access mobile users with Windows or MacOS endpoints running GlobalProtect version 5.2.11 or later.
    The steps for enabling ADEM for your users depends on if you are using Panorama Managed Prisma Access or Cloud Managed Prisma Access. After you enable ADEM for a user, the ADEM configuration will be pushed to the GlobalProtect app the next time the user connects and the app will register with the ADEM service.
  2. To see all registered ADEM users, from the Prisma Access app on the hub:
    Select
    Autonomous DEM
    Settings
    Endpoint Agent Management
    .
    This tab shows all registered ADEM users and indicates whether the user is online (the user device is sending keep-alive messages to the ADEM service) or offline (the ADEM service has not received a keep-alive message from the user device in the last ten minutes), when the user device was last seen, the username, device type, and hostname of the ADEM user, and what ADEM agent version they are running.
  3. Assign app tests to your registered ADEM users and remote sites.
    When you create a new app test, you can assign it to ADEM remote sites or all registered ADEM users (default) or choose specific users to assign a test to, or you can assign the tests to both remote sites and users. If you have already created a test to be assigned to all registered ADEM users, any tests will automatically start running on an endpoint as soon as it registers with ADEM. Once a test is started on an endpoint, it will send metrics from the app test to the ADEM service every five minutes.
  4. To temporarily stop an endpoint from running assigned app tests, select the user for whom you want to suspend app tests and toggle the
    Monitoring State
    .
    Note that if you disable monitoring, the user is still counted as a licensed ADEM user.
  5. To unregister an endpoint from ADEM, select the user(s) to remove and then click the trash can icon in the
    Action
    column.
    Unregistering a user frees up an ADEM license.
  6. To set the upgrade preferences for all the users, click
    Upgrade Now
    or
    Auto Upgrade
    from the
    Upgrade Options
    menu.

Recommended For You