Deploy the CN-Series Firewall as a DaemonSet on GKE
Complete the following procedure to deploy the CN-Series firewall as a Daemonset on GKE platform:
- Set up your Kubernetes cluster.To create a cluster in GKE, do the following:
If your cluster is on GKE, make sure to enable the Kubernetes Network Policy API to allow the cluster administrator to specify which pods are allowed to communicate with each other. This API is required for the CN-NGFW and CN-MGMT Pods to communicate.Verify that the cluster has adequate resources. Make sure that cluster has the CN-Series Prerequisites resources to support the firewall.kubectl get nodeskubectl describe node <node-name>View the information under the Capacity heading in the command output to see the CPU and memory available on the specified node.ResourceCN-MGMT SmallCN-NGFW SmallCN-MGMT LargeCN-NGW LargeMemory (Min)2Gi2Gi4Gi48GiCPU (Recommended Min)22412CPU (Max)None31None31Disk50GiBN.A.50GiBN.A.The CPU, memory and disk storage allocation will depend on your needs. See CN-Series Performance and Scaling.Ensure you have the following information:
- Click the navigation menu, go toKubernetes Engine, and then selectclusters.
- Select theGKE Standardas the cluster mode that you want to use, and then clickConfigure.
- Enter the cluster basic information including Name, Version, Location, Node subnet, and then clickCreate.
- Collect the Endpoint IP address for setting up the API server on Panorama.Panorama uses this IP address to connect to your Kubernetes cluster.For more information, see Set up the Kubernetes plugin for monitoring the clusters.
- Collect the template stack name, device group name, Panorama IP address, and optionally the Log Collector Group Name from Panorama.For more information, see Create a parent Device Group and Template Stack.
- The location of the container image repository to which you downloaded the images.
- (optional) If you configured a custom certificate in the Kubernetes plugin for Panorama, you must create the cert secret by executing the following command. Do not change the file name from ca.crt. The volume for custom certificates in pan-cn-mgmt.yaml and pan-cn-ngfw.yaml is optional.kubectl -n kube-system create secret generic custom-ca --from-file=ca.crt
- Edit the YAML files to provide the details required to deploy the CN-Series firewalls.You need to replace the image path in the YAML files to include the path to your private Google Container registry and provide the required parameters. See Editable Parameters in CN-Series Deployment YAML Files for details.
- Deploy the CNI DaemonSet.The CNI container is deployed as a DaemonSet (one pod per node) and it creates two interfaces on the CN-NGFW pod for each application deployed on the node. When you use the kubectl commands to run the pan-cni YAML files, it becomes a part of the service chain on each node.
- The CN-Series firewall requires three Service accounts with the minimum permissions that authorize it to communicate with your Kubernetes cluster resources. You should create Create Service Accounts for Cluster Authentication and verify that you have created the service account using the pan-cni-serviceaccount.yaml.
- Use Kubectl to run the pan-cni-configmap.yaml.kubectl apply -f pan-cni-configmap.yaml
- Use Kubectl to run the pan-cni.yaml.kubectl apply -f pan-cni.yaml
- Verify that you have modified the pan-cni-configmap and pan-cni YAML files.
- Run the following command and verify that your output is similar to the following example.
- Deploy the CN-MGMT StatefulSet.By default, the management plane is deployed as a StatefulSet that provides fault tolerance. Up to 30 firewall CN-NGFW pods can connect to a CN-MGMT StatefulSet.
- Verify that you have modified the pan-cn-mgmt-configmap and pan-cn-mgmt YAML files.Sample pan-cn-mgmt-configmapname: pan-mgmt-configmetadata:namespace: kube-systemdata:PAN_SERVICE_NAME: pan-mgmt-svcPAN_MGMT_SECRET: pan-mgmt-secret# Panorama settingsPAN_PANORAMA_IP: "x.y.z.a"PAN_DEVICE_GROUP: "dg-1"PAN_TEMPLATE_STACK: "temp-stack-1"PAN_CGNAME: "CG-GKE"Non-mandatory parameters#Recommended to have same name as the cluster name provided in Panorama Kubernetes plugin - helps with easier identification of pods if managing multiple clusters with same Panorama#CLUSTER_NAME: "<Cluster name>"#PAN_PANORAMA_IP2: ""#Comment out to use CERTs otherwise PSK for IPSec between pan-mgmt and pan-ngfw#IPSEC_CERT_BYPASS: ""#No values needed#Override auto-detect of jumbo-frame mode and force enable system-wide#PAN_JUMBO_FRAME_ENABLED: "true"#Start MGMT pod with GTP enabled. For complete functionality, need GTP enable at Panorama as well.#PAN_GTP_ENABLED: "true"#Enable high feature capacities. These need high memory for MGMT pod andhigher/matching memory than specified below for NGFW pod.#This requires kernel support and NGFW pod running with privileged: true#PAN_NGFW_MEMORY: "42Gi"Sample pan-cn-mgmt.yamlinitContainers:- name: pan-mgmt-initimage: <your-private-registry-image-path>containers: - name: pan-mgmtimage: <your-private-registry-image-path>terminationMessagePolicy: FallbackToLogsOnErrorUse Kubectl to run the yaml files.kubectl apply -f pan-cn-mgmt-configmap.yamlkubectl apply -f pan-cn-mgmt-secret.yamlkubectl apply -f pan-cn-mgmt.yamlYou must run the pan-mgmt-serviceaccount.yaml, only if you had not previously completed the Create Service Accounts for Cluster Authentication.Verify that the CN-MGMT pods are up.It takes about 5-6 minutes.Usekubectl get pods -l app=pan-mgmt -n kube-systemNAME READY STATUS RESTARTS AGEpan-mgmt-sts-0 1/1Running 0 27hpan-mgmt-sts-1 1/1 Running 0 27hDeploy the CN-NGFW pods.By default the firewall dataplane CN-NGFW pod is deployed as a DaemonSet. An instance of the CN-NFGW pod can secure traffic for up to 30 application Pods on a node.
Verify that you can see CN-MGMT, CN-NGFW and the PAN-CNI on the Kubernetes cluster.kubectl -n kube-system get pods0 27hpan-cni-5fhbg 1/1 Running0 27hpan-cni-9j4rs 1/1 Running0 27hpan-cni-ddwb4 1/1 Running0 27hpan-cni-fwfrk 1/1 Running0 27hpan-cni-h57lm 1/1 Running0 27hpan-cni-h57lm 1/1 Running0 27hpan-cni-j62rk 1/1 Running0 27hpan-cni-lmxdz 1/1 Running0 27hpan-mgmt-sts-0 1/1 Running0 27hpan-mgmt-sts-1 1/1 Running0 27hpan-ngfw-ds-8g5xb 1/1 Running27hpan-ngfw-ds-qsrm6 1/1 Running0 27hpan-ngfw-ds-vqk7z 1/1 Running0 27hpan-ngfw-ds-zncqg 1/1 RunningAnnotate the application yaml or namespace so that the traffic from their new pods is redirected to the firewall.You need to add the following annotation to redirect traffic to the CN-NGFW for inspection:
- Verify that you have modified the YAML files as detailed in PAN-CN-NGFW-CONFIGMAP and PAN-CN-NGFW.containers: - name: pan-ngfw-container image: <your-private-registry-image-path>
- Use Kubectl apply to run the pan-cn-ngfw-configmap.yaml.kubectl apply -f pan-cn-ngfw-configmap.yaml
- Use Kubectl apply to run the pan-cn-ngfw.yaml.kubectl apply -f pan-cn-ngfw.yaml
- Verify that all the CN-NGFW Pods are running. (one per node in your cluster)This is a sample output from a 4-node on-premises cluster.kubectl get pods -n kube-system -l app=pan-ngfw -o wideNAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATESpan-ngfw-ds-8g5xb 1/1 Running 0 27h 10.233.71.113 rk-k8-node-1 <none> <none>pan-ngfw-ds-qsrm6 1/1 Running 0 27h 10.233.115.189 rk-k8-vm-worker-1 <none> <none>pan-ngfw-ds-vqk7z 1/1 Running 0 27h 10.233.118.208 rk-k8-vm-worker-3 <none> <none>pan-ngfw-ds-zncqg 1/1 Running 0 27h 10.233.91.210 rk-k8-vm-worker-2 <none> <none>
For example, for all new pods in the “default” namespace:annotations: paloaltonetworks.com/firewall: pan-fwkubectl annotate namespace default paloaltonetworks.com/firewall=pan-fwOn some platforms, the application pods can start when the pan-cni is not active in the CNI plugin chain. To avoid such scenarios, you must specify the volumes as shown here in the application pod YAML.volumes: - name: pan-cni-ready hostPath: path: /var/log/pan-appinfo/pan-cni-ready type: DirectoryDeploy your application in the cluster.
Recommended For You
Recommended VideosRecommended videos not found.