Apply the Host Compliance Profile to a Security Policy
Focus
Focus
GlobalProtect

Apply the Host Compliance Profile to a Security Policy

Table of Contents

Apply the Host Compliance Profile to a Security Policy

This section provides you information on how to apply host compliance profile to a security policy
You can add the HCP to a security policy and create the HCP-enabled security rules on your gateway(s).
As a best practice, you should create your security policy rules and test that they match the expected flows (based on the source and destination criteria) before adding your HCPs. By doing this, you can better determine the proper placement of the HCP-enabled rules within the security policy.
  1. Select PoliciesSecurity, and select the rule to which you want to add a HCP.
  2. On the Source tab, make sure the Source Zone is a zone for which you enabled User-ID.
  3. On the Source tab under Source Device, Add the HCP used to identify devices (you can add up to 127 HCPs to a rule).
  4. Click OK to save the rule.