: Log Card Subinterface
Focus
Focus

Log Card Subinterface

Table of Contents

Log Card Subinterface

  • Network > Interfaces > Ethernet
To add a Log Card Interface, select the row for that interface,
Add Subinterface
, and specify the following information.
Log Card Subinterface Settings
Configured In
Description
Interface Name
LPC Subinterface
Interface Name
(read-only) displays the name of the log card interface you selected. In the adjacent field, enter a numeric suffix (1-9,999) to identify the subinterface.
Comment
Enter an optional description for the interface.
Tag
Enter the VLAN
Tag
(0-4,094) for the subinterface.
Make the tag the same as the subinterface number for ease of use.
Virtual System
LPC Subinterface
Config
Select the virtual system (vsys) to which the Log Processing Card (LPC) subinterface is assigned. Alternatively, you can click
Virtual Systems
to add a new vsys. Once an LPC subinterface is assigned to a vsys, that interface is used as the source interface for all services that forward logs (syslog, email, SNMP) from the log card.
IPv4
Ethernet Interface
Log Card Forwarding
If your network uses IPv4, define the following:
  • IP address
    —The IPv4 address of the port.
  • Netmask
    —The network mask for the IPv4 address of the port.
  • Default Gateway
    —The IPv4 address of the default gateway for the port.
IPv6
If your network uses IPv6, define the following:
  • IP address
    —The IPv6 address of the port.
  • Default Gateway
    —The IPv6 address of the default gateway for the port.

Recommended For You