: Device > Setup > DLP
Focus
Focus

Device > Setup > DLP

Table of Contents

Device > Setup > DLP

Configure the firewall setting for file uploads to the Enterprise Data Loss Prevention (E-DLP) cloud service.
  • DeviceSetupDLP
Configure the network settings for files scanned to the Enterprise Data Loss Prevention (E-DLP) cloud service.
Field
Description
Max Latency (sec)
Specify the maximum latency in seconds (between 1 and 240) for a file upload before an action is taken by the firewall. Default is 60.
Action on Max Latency
Specify the action the firewall takes when a file upload latency reaches the configured Max Latency.
  • Allow (default)— Firewall allows a file upload to the target destination if the Max Latency is exceeded. File isn't forwarded to Enterprise DLP for inspection.
  • Block—Firewall blocks traffic upload to target destination if Max Latency is exceeded. File isn't forwarded to Enterprise DLP for inspection.
Max File Size (MB)
Enforce a maximum file size (between 1 and 20) for upload to Enterprise DLP. Default is 20.
Action on Max File Size
Specify the action the firewall takes when a file upload reaches the configured Max File Sized.
  • Allow (default)— Firewall allows a file upload to the target destination if the Max File Size is exceeded. File isn't forwarded to Enterprise DLP for inspection.
  • Block—Firewall blocks a file upload to the target destination if the Max File Size is exceeded. File isn't forwarded to Enterprise DLP for inspection.
Log Files Not Scanned
Check (enable) to generate an alert in the data filtering log when a file could not be uploaded to Enterprise DLP.
Action on any Error
Specify the action the firewall takes when an error is encountered during a file upload to Enterprise DLP.
  • Allow (default)— Firewall allows a file upload to continue to Enterprise DLP if an error is encountered during upload.
  • Block—Firewall blocks a file upload to Enterprise DLP if an error is encountered during upload.