Set Commands Changed in PAN-OS 11.2
Table of Contents
Set Commands Changed in PAN-OS 11.2
Command line interface 'set' commands that are changed in PAN-OS 11.2:
The following commands are modified in the 11.2 release.
The
ha1-a|ha1-b
options were added to the following
commands.set deviceconfig high-availability interface ha1 port set deviceconfig high-availability interface ha1-backup port
The
hsci
option was added to the following commands.set deviceconfig high-availability interface ha2 port set deviceconfig high-availability interface ha2-backup port set deviceconfig high-availability interface ha3 port
The minimum value for the following commands were changed to 100.
set network profiles bfd-profile <name> min-tx-interval set network profiles bfd-profile <name> min-rx-interval
The
auto
options was changed to value
for the following commands.set network interface ethernet <name> link-speed set network interface ethernet <name> link-duplex
The
cellular
option was added to the following
command.set network virtual-router <name> routing-table ip static-route <name> path-monitor monitor-destinations <name> source
The
validate
option was removed from the following
command.set network routing-profile filters prefix-list <name> type ipv4 ipv4-entry <name> prefix entry network
The
local deep learning
option was added and imsi, imei, source
uuid, dest uuid
options were removed from the following command.set shared reports <name> type threat group-by set shared reports <name> type threat group-by
The
imsi, imei
options were removed from the following commands.set shared reports <name> type wildfire group-by set shared reports <name> type url group-by set shared reports <name> type data group-by set shared reports <name> type traffic group-by set shared reports <name> type thsum group-by set shared reports <name> type trsum group-by set shared reports <name> type urlsum group-by set reports <name> type wildfire group-by set reports <name> type url group-by set reports <name> type data group-by set reports <name> type traffic group-by set reports <name> type thsum group-by set reports <name> type trsum group-by set reports <name> type urlsum group-by
The
project name
options was added to the following command.set shared reports <name> type globalprotect group-by set reports <name> type globalprotect group-by
The
3
option was set as the max for the following command.set global-protect global-protect-gateway <name> gp-gw-dhcp entry retry-time
The
30
option was set as the max for the following command.set global-protect global-protect-gateway <name> gp-gw-dhcp entry dhcp-timeout
The
alert
option was added to the following command.set profiles wildfire-analysis <name> mica-engine-wildfire-rules <name> action
