: IPSec Termination Node Conventions and Tag Nomenclature
Focus
Focus

IPSec Termination Node Conventions and Tag Nomenclature

Table of Contents

IPSec Termination Node Conventions and Tag Nomenclature

Using the same information gained above from our nodes for
France North
(mapped to eu-west-3), the tagging methodology for the CloudBlade can now be determined. The tag constructs within the 3.1.1 CloudBlade would look as follows:
Prisma_region: <<region name>> : <<IPSec Termination Node Name or Number>>
With this construct, the tags for the interface(s) will look similar to the following:
prisma_region:eu-west-3:france-north-portia
prisma_region:eu-west-3:france-north-bluebells
OR
prisma_region:eu-west-3:1
prisma_region:eu-west-3:2
In 3.1.1, the node name (france-north-portia) or order that the node appears in the list (1) can both be used in the naming convention for the interface tags.
You can refer to the region tag codes of the Prisma Access Regions.
In order to assist with the automation of the scripts and deployments, the Prisma SD-WAN Tagger script can also be used to help create or configure the tags.

Recommended For You