Customize Prisma Access Objects Names using CloudBlade Tag
Table of Contents
Customize Prisma Access Objects Names using CloudBlade Tag
316 PIC
Starting with the release version 3.1.6,
the names of the objects created by the Prisma Access CloudBlade
(Panorama managed) can be controlled through configurable tags on
the site. Use the tag
prisma_name:<custom_name>
for
a site, where the <custom name>
added
must follow the below conventions:
- Only characters and numbers [a-z], [A-Z], [0-9] are allowed.
- Characters must not exceed 12 or be less than 3 characters.
- Ensure no duplicate prisma_name is set across sites.
You can customize the
prisma_name:<custom_name>
tag
only for newer site on-boardings.The following are some examples of valid and invalid tags:
Valid Tags
- prisma_name:site123
- prisma_name:auckland123
- prisma_name:123auckland
- prisma_name:12auck3land
Invalid Tags
- prisma_name:a
- prisma_name:ab
- prisma_name:a b
- prisma_name:a b c
- prisma_name:a_bc
- prisma_name:a-bc
For the custom name to be configured, you must add the
prisma_name:<custom_name>
tag
to the site before adding the prisma_access
tag. If the prisma_name tag is not added, the Cloudblade returns to
using an encoded version of the
siteID
in
the Prisma Access object names created on Prisma Access (Panorama
managed).