Add the RADIUS Server
Table of Contents
Add the RADIUS Server
Learn to add the RADIUS server on an ION device.
Two RADIUS servers are supported on an ION
device. If you configure only one RADIUS server, then the server
is used as the primary RADIUS server. If you have configured two
RADIUS servers, then the Priority value of the RADIUS server decides
the primary server—lower the priority value, higher the priority.
RADIUS
server with lower priority value is set as primary RADIUS server
and the other server as the secondary server. If the priority value
is the same for both the servers or not configured, then the first
server in the received server list is set as primary and the other
server as secondary server.
- Navigate to tab.
- SelectConfigure the device.
- Select to add the RADIUS servers.You can add a maximum of two servers.
- Update the following information:
- Enter a validIP address (IPv4).
- Enter aAuthentication Port Numberbetween 1-65535. Default port is 1812.
- Enter aAccounting Port Numberbetween 1-65535. Default port is 1813.
- Enter aPriorityvalue between 1-255. Lower the priority number, higher is the priority.
- Enter aShared secret, the length of the secret must be between 8-64 characters.
- If there is one only server added, then you canAddone more RADIUS server and/orDeletethe existing server details.
- Select theSource Interfaceby selecting the port. Source Interface is a global configuration.
- Saveyour updates.
Monitor RADIUS Server Stats and Activity
The RADIUS page displays the current active RADIUS server details where you can
monitor the statistics.
- Navigate from to view the device RADIUS Server status.
- Select theAuth Clientsto view the status of authorized clients and details.
- To view the RADIUS server activity charts, navigate to , select a device to view the charts.
