Configure Internet Circuit Underlay Link Aggregation

On the
Prisma SD-WAN
web interface, go to
Manage
Sites
, and select a site from the list of sites.
For a site, click
Configurations
Internet Circuits
Change Circuits
.
Click
Edit
to view circuit information.
In the LQM Configurations:
To enable
LQ Monitoring
for ongoing links quality measurements, such as latency, loss, and jitter select
Yes
. LQM is enabled by default on branch to data center paths.
Select one or more
Data Centers
to be the basis for Link Quality metrics for the internet underlay.
If nothing is selected, by default, all data centers are chosen.
Select
Yes
from the
Use LQM for Non Hub Paths
for Link Quality metrics for the internet underlay.
From the
Aggregation
list, choose
Minimum
(lowest value of selected data centers), or
Maximum
(highest value of selected data centers), or
Average
(average value of selected data centers). By default, minimum will be selected.
The
Summary
in
Link Quality
charts display minimum, maximum, or average link-level metrics based on selecting data centers and the aggregation method. The details are also displayed on the main
Dashboard
tab.
The
Aggregation
list does not display if you select a single data center.
Optionally
, the setting is also controlled at the Circuit Category level (recommended). Please see for instructions on editing a circuit category.