Configure a Main Interface for HA Connectivity

Navigate to
Workflows
Devices
Claimed Device
.
Select a device and then select a port on the device to configure for HA.
On the
Interfaces
tab, select
Main Interfaces
.
For
Admin Up
, select Yes.
(
Optional
) Enter
Description
and
Tags
.
Select the
Interface Type
as Port.
From
Use this Port for
, select HA.
Select
Scope
as Global to advertise the prefix.
Select Static
IPv4 Configuration
for the interface.
Provide IP Address, Default Gateway, and DNS Server. The IP address should be same as the peer IP address. Example of the IP address on the active and backup devices is shown below:
Active device:
IP Address/Mask—100.1.10.1/24
Default Gateway—100.1.10.2
Use this interface for—HA
Backup device:
IP Address/Mask—100.1.10.2/24
Default Gateway—100.1.10.1
Use this interface for—HA
Save
the configuration.

To make the device level configuration, on the
Basic Info
tab, on
Redundancy
, create a HA group, and then assign and configure HA.
The
Redundancy
section displays the details of the devices in the HA group, including the status of the devices and the priorities set for the devices.
Add
HA Configuration
.

Select the port configured for the
HA Control Interface
.
Save
the changes.
On the other HA device, configure the similar HA set up.