Configure LLDP
Table of Contents
Expand all | Collapse all
-
-
- Configure Circuits
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Add a Branch
- Add a Data Center
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Enable IoT Device Visibility in Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Sub-Interface
- Configure a Loopback Interface
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
-
-
- Configure IPFIX
- Configure IPFIX Profiles
- Configure IPFIX Templates
- Configure Collector Contexts
- Configure Filter Contexts
- Configure Global IPFIX Prefixes
- Configure Local IPFIX Prefixes
- Attach an IPFIX Profile to an ION Device
- Attach a Collector Context to a Device Interface
- Attach a Filter Context to a Device Interface
- Configure High Availability (HA) for IPFIX
- Flow Information Elements
- Options Information Elements
- Configure SNMP
-
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
-
-
- Native SASE Integration with Prisma SD-WAN
- Connect a Single Prisma SD-WAN Site to Prisma Access
- Connect Multiple Prisma SD-WAN Sites to Prisma Access
- Edit Application Policy Network Rules
- Understand Service and Data Center Groups
- Verify Standard VPN Endpoints
- Configure Standard Groups
- Assign Domains to Sites
- Prisma SD-WAN Incidents and Alerts
Configure LLDP
LLDP-MED (Media Endpoint Discovery) is
an extension to LLDP that operates between endpoint devices to support
voice-over-IP (VoIP) applications. LLDP-MED allows a device to determine
the capabilities of a connected device, neighbors, and if these
capabilities are enabled.
The device is capable of operating in receive-only
mode or transmit-and-receive mode for LLDP. By default, all non-PoE
ports are set to receive-only mode and PoE ports are set to transmit-and-receive
mode. All the ports are set to default LLDP TLVs until the port
receives LLDP-MED TLVs. Change the LLDP configuration
at the interface level on the
Prisma SD-WAN
user interface.The following LLDP and LLDP-MED TLVs are currently supported:
- LLDP TLVs
- Chassis ID
- Port ID
- TTL
- System Name
- System Description
- System Capabilities
- LLDP-MED TLVs
- LLDP-MED Capabilities
- Extended Power-via-MDI
- Inventory Management
- Hardware Revision
- Software Revision
- Firmware Revision
- Serial Number
- Manufacturer Name
- Model Name