: Advanced Path and QoS Stacks
Focus
Focus

Advanced Path and QoS Stacks

Table of Contents

Advanced Path and QoS Stacks

Advanced Path and QoS Set Stacks comprise Path Policy Sets and Quality of Service (QoS) Policy Sets. Path policy sets specify traffic engineering while QoS policy sets specify business priority. These policy sets contain policy rules.
An Advanced path or a QoS Stack consists of a minimum of two default policy rules—Default Rule and Enterprise Default Rule. Additional policy rules can be added as required. A site can have a single Path or QoS Stack attached to it at a time. An Advanced Path or QoS Stack is a collection of Path or QoS policy sets that are stacked in the order in which they are evaluated by a site.
  • A Path or QoS Stack can accommodate a maximum of four policy sets and one default rule policy set. The policy sets in a stack are ordered from left to right, with the left-most policy set designated as the highest priority.
  • At any given time, only one Path or QoS Stack can be attached to a site. You can add, change, or delete a policy set or a Path or QoS stack at any time.
The relationship among Advanced Path Stacks, Policy Sets, and Policy Rules is shown below.
Path and QoS policies simplify policy management. For example, all applications may have the same priority across an entire enterprise, but based on geographical regions, path policies may differ between sites.

Recommended For You