Focus

Prisma SD-WAN ION CLI Reference

Access the ION Device CLI Commands Using the Prisma SD-WAN Web Interface

Table of Contents

Access the ION Device CLI Commands Using the Prisma SD-WAN Web Interface

Access the Prisma SD-WAN ION CLI commands through administration console.

Remote Access allows operators to access all the Prisma SD-WAN ION CLI commands for diagnosing and troubleshooting device (online and in a claimed state) issues through the Prisma SD-WAN web interface. The maximum number of simultaneous operator sessions per device is 10 and per customer account is 30.

The CLI Commands are accessed by user Roles with Root, Network Admin, Security Admin, Admin, Super, or View Only permissions. In addition to the console credentials, an operator requires device credentials to successfully log in to the device.

There are two ways to remotely access the device CLI commands, either through the Claimed Devices menu or from a specific device configuration page.

Select WorkflowsPrisma SD-WAN SetupDevicesClaimed Devices.
1. Click ellipsis menu, select Remote Sessions to access commands remotely.
  
  The device must be online to access the CLI commands.
2. Another way to access the CLI commands, click ellipsis menu (next to the device) and Remote access to access CLI commands.
Log in with your credentials to access the device CLI commands.
Click the gear icon on the claimed devices page and select Remote Sessions.
The Remote Sessions widget displays both the Active Sessions and History tabs. To view active sessions filter by Session ID, Element ID or Operator. You can close an active session by clicking the Close from Action column. You can sort historical sessions by the column headers.

Assign a Static IP Address Using the Console

Use CLI Commands