>
    debug time sync
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Use CLI Commands
    5. Debug Commands
    6. debug time sync
    Download PDF

    debug time sync

    Table of Contents

    debug time sync

    Use the debug time sync command to manually force the clock to synchronize with the specified time source. It is used only in troubleshooting scenarios and does not need to run during normal operations.

    Command

    debug time sync [ntp | cts | any]

    Options

    ntpEnter ntp to synchronize with time.nist.gov. This is the default source.
    ctsEnter cts to synchronize with controller.cgnx.net.
    anyEnter any to synchronize with time.nist.gov or with controller.cgnx.net. First, try the network time protocol (NTP) and then the controller time source (CTS).

    Command Notes

    RoleSuper
    Related Commands
    dump time status
    Introduced inRelease 4.7.1

    Example

    debug time sync ntp

    © 2024 Palo Alto Networks, Inc. All rights reserved.