Focus

Prisma SD-WAN ION CLI Reference

traceroute6

Table of Contents

traceroute6

Use the

traceroute6

command to print the route taken by packets to a destination and to identify the route or measure packet transit delays across a network for IPv6.

Command

traceroute6 interface (args="")

Options

dst-ipv6	Enter the interface to listen on.
interface	Enter the interface name or ID.
args= "-F"	Use when probe packets should not be fragmented.
args= "-l"	Displays the time-to-live (TTL) value of the returned packet.
args="-l"	Use ICMP ECHO instead of UDP datagrams.
args="-m number"	Enter the maximum number of hops (max TTL value) that trace route probe.
args= "-n"	Print hop addresses numerically rather than symbolically.
args="-p string"	This is the base UDP port number used in probes (default value is 33434).
args="-q number"	Enter the number of probe packets per TTL. The default value is 3.
args= "-t number"	Enter a value for Type of Service (TOS) in probe packets. The default value is 0.
args="-w number"	Enter a time (in seconds) to wait for a response to a probe. The default value is 3 seconds.

Command Notes

Role	Super, Read Only
Related Commands	—
Introduced in	Release 6.0.1

Example

traceroute6 2 2001::1
				
				traceroute to 2001::1 (2001::1) from 2001::22, 30 hops max, 72 byte packets 
				1  2001::1 (2001::1)  0.378 ms  3.645 ms  0.220 ms 
				
				traceroute6 2 2001::33
				
				traceroute to 2001::33 (2001::33) from 2001::22, 30 hops max, 72 byte packets
				1  2001::22 (2001::22)  3064.851 ms !H  3067.614 ms !H  3071.971 ms !H

traceroute

Dump Commands

Prisma SD-WAN ION CLI Reference

traceroute6

traceroute6

Command

Options

Command Notes

Example

Recommended For You