Prisma SD-WAN ION CLI Reference
    : dump dhcp-relay config
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Dump Commands
    7. dump dhcp-relay config
    Download PDF

    Prisma SD-WAN ION CLI Reference

    dump dhcp-relay config

    Table of Contents

    dump dhcp-relay config

    Use the
    dump dhcp-relay config
     command to display the DHCP relay configuration. DHCP relay configuration is a part of interface configuration. A list of DHCP server IPs are displayed. A maximum of two DHCP servers are configured as part of DHCP relay configuration per interface.
    DHCP relay supports four re-forwarding policies: keep, replace, append, and drop. The default value is replace. If option 82 is enabled, then those options are replaced at the DHCP relay. If option 82 is not enabled, incoming packets from other relays are forwarded without any modification. DHCP Relay can be configured only on branch ION devices.
    By default, controller port is used as the source interface to reach the DHCP servers. If option 82 support is enabled on the DHCP relay, option 82 parameters are added to incoming DHCP requests from a client or another relay, before forwarding to the DHCP server.

    Command

    dump dhcp-relay config

    Options

    None

    Command Notes

    Role
    Super, Read Only, Monitor
    Related Commands
    dump dhcprelay stat
    config interface
    Introduced in
    Release 5.1.3

    Example

    dump dhcp-relay config
				Name : controller 1
				ID : 15476292791020179
				DHCP Relay Enabled : true
				Server IPs : [10.9.17.18]
				SourceInterface : 1
				Option 82 Enabled : true
				Circuit ID : 200
				Remote ID : 500
				Reforwarding Policy : replace

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.