: dump interface status interface module
Focus
Focus

dump interface status interface module

Table of Contents

dump interface status interface module

Use the dump interface status interface module command to display the EEPROM information of a device interface.
Information displayed includes gigabit interface converter (GBIC) or small form-factor pluggable (SFP) and extended identifier. Details such as type of connector, transceiver codes and types, lengths supported for single-mode optical fiber (SMF), copper, and other optical fibers, along with vendor details, are also displayed.

Command

dump interface status [ all | interface interface name ] module

Options

allEnter all to display status for all interfaces.
interfaceEnter the interface name to display configuration for a specific interface.

Command Notes

RoleSuper, Read Only, Monitor
Related Commands
dump interface status
Introduced in Release 5.1.3

Example

dump interface status 14 moduleIdentifier : 0x03 (SFP)Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interfaceID)Connector : 0x00 (unknown or unspecified)Transceiver codes : 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00Transceiver type : Ethernet: 1000BASE-TEncoding : 0x01 (8B/10B)BR, Nominal : 1300MBdRate identifier : 0x00 (unspecified)Length (SMF,km) : 0kmLength (SMF) : 0mLength (50um) : 0mLength (62.5um) : 0mLength (Copper) : 100mLength (OM3) : 0mLaser wavelength : 0nmVendor name : AVAGOVendor OUI : 00:17:6aVendor PN : ABCU-5730RZVendor rev :Option values : 0x00 0x10Option : TX_DISABLE implementedBR margin, max : 0%BR margin, min : 0%Vendor SN : AGC15315200QDate code : 150729