Prisma SD-WAN ION CLI Reference
    : dump interface status
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Dump Commands
    7. dump interface status
    Download PDF

    Prisma SD-WAN ION CLI Reference

    dump interface status

    Table of Contents

    dump interface status

    Use the
    dump interface status
     command to display the interface status (port or sub interface). The speed is 10,000 Mbps for 10GE SFP+ ports, and 1,000, 100, or 10 Mbps for 1GE ports. The address is the current IPv4 and IPv6 addresses and mask for the interface and the current DNS server learned through a DHCP
    or AutoConf
     server, or could be a static IP address and DNS server.
    To display a loopback interface status, enter the loopback interface address for the interface.

    Command

    dump interface status (all | interface
				
    interface_name
    )

    Options

    all
    Enter all to display status for all interfaces.
    interface
    Enter the
    interface name
     to display configuration for a specific interface.

    Command Notes

    Role
    Super, Read Only, Monitor
    Related Commands
    dump interface config
    Introduced in
    Release 4.4.1

    Example

    dump interface status 1
				Interface               : 1
				Device                  : eth1
				ID                      : 15886634104300012
				MAC Address             : 00:50:56:ad:9d:b0
				State                   : up
				Last Change             : 2020-12-02 10:29:38.373 (164h23m30s ago)
				Duplex                  : full
				Speed                   : 1000Mbps
				Address                 : 10.10.10.1/24
				Secondary Address       : 10.10.11.2/24
    Example of Cellular interfaces
    dump interface status cellular1
				Interface		: cellular1
				Device			: cellular1
				ID			: 1643856748406010228
				Active Cellular Link	: True
				APN Name		: fast.t-mobile.com
				APN Authentication Type	: none
				State			: up
				Last Change		: 2022-10-28 18:26:30.553 (29.554s ago)
				Address			: 26.19.232.236/32
				Route			: 0.0.0.0/0 via 26.19.232.236 metric 0
				DNS Server		: 10.177.0.34 , 10.177.0.210
				Ipv6 Address		: 2607:fb90:46f:11f6:495c:b3f:bdcb:53d8/64
				Ipv6 DNS Server 	: fd00:976a::9 , fd00:976a::10
				DPDK Controlled		: true
    Example of IPv6
    dump interface status 1
               Interface	      : 1
               Device		     : eth1
               ID		         : 1662377409110006828
               MAC Address	    : 00:50:56:ab:d0:08
               LinkLocalAddress   : fe80::250:56ff:feab:d008/64
               State		      : up
               Last Change	    : 2023-02-22 06:50:43.480 (19.938s ago)
               IPv6 Address	   : 2014::250:56ff:feab:d008/64
                 Route		    : ::/0 via fe80::250:56ff:fe88:53a8 metric 0
               DPDK Controlled	: true

               Autoconf information received from router
                 Managed Flag	 : false
                 Other Flag	   : false
    Example of command output showing PoE and STP state
    Interface       : 7
				Device          : dsa7
				ID              : 1646140037785020628
				MAC Address     : 94:56:41:01:8a:4a
				State           : down
				Last Change     : 2022-03-15 03:20:50.200 (1038h7m40s ago)
				Status          : Not connected
				DPDK Controlled : false
				PoE State  
				PoE Enabled                           : False  
				Device Type                           : None  
				Power Pair Control Ability            : False  
				Power Pair State                      : NONE  
				Detection Status                      : disabled  
				Power Priority                        : low  
				Power Class Type                      : NONE  
				Power Consumed                        : 0.0  
				Power Usage Threshold                 : 100    
				Signal Channel Requested Class      : NONE    
				Signal Channel Assigned Class       : NONE    
				Signal Channel Detection Status     : disabled    
				Signal Channel Power Consumed       : 0.0    
				Spare Channel Requested Class       : NONE    
				Spare Channel Assigned Class        : NONE    
				Spare Channel Detection Status      : disabled    
				Spare Channel Power Consumed        : 0.0Stp 
				Interface State 
				STP Enabled         : False    
				BPDU guard enabled  : False    
				Root Guard enabled  : False    
				Port STP State      :    
				Port Cost           : 0    
				Port Priority       : 128

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.