Prisma SD-WAN ION CLI Reference
    : dump routing multicast interface
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Dump Commands
    7. dump routing multicast interface
    Download PDF

    Prisma SD-WAN ION CLI Reference

    dump routing multicast interface

    Table of Contents

    dump routing multicast interface

    Use the
    dump routing multicast interface
     command to display the routing multicast interface specific configurations of a device.

    Command

    dump routing multicast interface ( all |
				
    interface name
     )

    Options

    all
    Enter all to display all the details related to routing multicast interface.
    interface name
    Enter
    interface name
     to display per interface details related to routing multicast interface.

    Command Notes

    Role
    Super, Read Only, Monitor
    Related Commands
    dump routing multicast status
    Introduced in
    Release 5.6.1

    Example

    dump routing multicast interface all
				Interface    State      Address      PIM Nbrs      PIM DR    FHR   IfChannels
				eth1           up       10.2.77.10       0           local     0          1
				eth4           up         4.4.4.20       4         1.1.1.10    0          0
				mcast0         up       100.64.0.4       1            local    0          0
				pimreg         up          0.0.0.0       0            local    0          0

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.