Prisma SD-WAN ION CLI Reference
    : dump routing multicast internal vif-entries
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Dump Commands
    7. dump routing multicast internal vif-entries
    Download PDF

    Prisma SD-WAN ION CLI Reference

    dump routing multicast internal vif-entries

    Table of Contents

    dump routing multicast internal vif-entries

    Use the
    dump routing multicast internal vif-entries
     command to display the internal vif entries in multicast.
    This command is not available from the release 6.0.1 onward.

    Command

    dump routing multicast internal vif-entries

    Options

    None

    Command Notes

    Role
    Super, Read Only, Monitor
    Related Commands
    dump routing multicast status
    Introduced in
    Release 5.6.1

    Example

    dump routing multicast internal vif-entries
				PIM VIF Interface array
				VIF  Index Interface         State    Flags      Address  
				0  64    pimreg            Up       0x4        192.168.1.4 (eth1)  
				1  3     eth1              Up       0x240000   192.168.1.4  
				2  4     eth2              Up       0x200400   192.168.2.4  
				3  5     eth3              Up       0xa40000   192.168.3.4  
				4  6     eth4              Up       0xc0400    192.168.4.4
				
				PIM VIF Entry list
				VIF  Index Interface         State    Flags      Address  
				0  64    pimreg            Up       0x4        192.168.1.4 (eth1)  
				1  3     eth1              Up       0x240000   192.168.1.4  
				2  4     eth2              Up       0x200400   192.168.2.4  
				3  5     eth3              Up       0xa40000   192.168.3.4  
				4  6     eth4              Up       0xc0400    192.168.4.4

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.