: dump routing multicast pim
Focus
Focus

dump routing multicast pim

Table of Contents

dump routing multicast pim

Use the
dump routing multicast pim
command to display the routing multicast protocol independent multicast (pim) specific configurations of a device.

Command

dump routing multicast pim <rp (all |
address
| dynamic)| neighbor | bsrinfo>

Options

rp
Enter rp
all/ rp address/ dynamic
to display all the details related to routing multicast pim.
neighbor
Enter neighbor to display PIM neighbors available for the ION device.
bsrinfo
Enter bsrinfo to display PIM bsrinfo available for the ION device.
Release 6.0.1

Command Notes

Role
Super, Read Only, Monitor
Related Commands
dump routing multicast status
Introduced in
Release 5.6.1

Example

dump routing multicast pim neighbor LAN Neighbors -------------- Interface Neighbor Uptime Holdtime DR Pri eth4 2.2.2.1 24:29:40 00:01:36 900 eth4 1.1.1.1 24:29:40 00:01:36 900 eth4 9.9.9.1 24:29:40 00:01:36 900 eth4 1.1.1.10 24:29:40 00:01:36 1999999 Total Active LAN neighbor count : 4 WAN Neighbors -------------- Neighbor State Uptime London UP 24:29:01 Total Active WAN neighbor count : 1 dump routing multicast pim rp all RP address group/prefix-list OIF I am RP Source 1.1.1.1 224.0.0.0/4 London no Static dump routing multicast pim rp address=1.1.1.1 RP address group/prefix-list OIF I am RP Source 1.1.1.1 224.0.0.0/4 London no Static

Recommended For You