Focus

Prisma SD-WAN ION CLI Reference

dump switch vlan-db

Table of Contents

dump switch vlan-db

Use the dump switch vlan-db command to display the available VLANs on the switch and which members are part of the VLAN programmed in the device.

Command

Dump switch vlan-db

Options

None

Command Notes

Role	Super, Read Only, Monitor
Related Commands	—
Introduced in	Release 6.0.2

Example

FID    VID    SID    MEMBERTAGP        VP USEFPRI FPRI USEQPRI QPRI DONTLEARN FILTERUC FILTERBC FILTERMC routeDis MLDSnoop IGMPSnoop				------------------------------------------------------------------------------------------------------------------------------------------
				0x1    0x1    0x0    3 3 3 3 3 1 1 1 1 2 3   0  0       0    0       0    0         0        0        0        0        1        
				10x3e8  0x3e8  0x0    3 3 3 1 3 3 3 3 3 2 3   0  0       0    0       0    0         0        0        0        0        1        
				10x3e9  0x3e9  0x0    3 3 3 3 1 3 3 3 3 2 3   0  0       0    0       0    0         0        0        0        0        1        
				10xfa3  0xfa3  0x0    3 0 3 3 3 3 3 3 3 3 0   0  0       0    0       0    0         0        0        0        0        0        
				00xfa4  0xfa4  0x0    3 3 0 3 3 3 3 3 3 3 0   0  0       0    0       0    0         0        0        0        0        0        0

Options 0x63 0x63 0x0 3 3 3 3 2 2 3 1 2 2 3 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 2 2 3 1 2 2 3 represent from switch port 0 to 10 2 is a member of the vlan 3 is not a member of the vlan 1 is a member, also the port’s default vlan

dump switch port status

dump syslog config