VM-Series Deployment Guide
    : Performance Tuning of the VM-Series for KVM
    Focus
    Download PDF
    Focus
    1. Home
    2. VM-Series
    3. VM-Series Deployment Guide
    4. Set Up the VM-Series Firewall on KVM
    5. Performance Tuning of the VM-Series for KVM
    Download PDF

    VM-Series Deployment Guide

    Performance Tuning of the VM-Series for KVM

    Table of Contents
    End-of-Life (EoL)

    Performance Tuning of the VM-Series for KVM

    The VM-Series firewall for KVM is a high-performance appliance but may require tuning of the hypervisor to achieve the best results. This section describes some best practices and recommendations for facilitating the best performance of the VM-Series firewall.
    By default, KVM uses a linux bridge for VM networking. However, the best performance in a virtual environment is realized with dedicated I/O interfaces (PCI passthrough or SR-IOV). If a virtual switch is required, use a performance-optimized virtual switch (such as Open vSwitch with DPDK).

    © 2024 Palo Alto Networks, Inc. All rights reserved.