Ingest Logs from Cisco ASA Firewalls

Extend Cortex XDR visibility into logs from Cisco ASA firewalls.
Ingesting logs and data requires a
Cortex
XDR
Pro per TB license.
If you use Cisco ASA firewalls, you can still take advantage of
Cortex
XDR
investigation and detection capabilities by forwarding your firewall logs to
Cortex
XDR
. This enables
Cortex
XDR
to examine your network traffic to detect anomalous behavior.
Cortex
XDR
can use Cisco ASA firewall logs as the sole data source, but can also use Cisco ASA firewall logs in conjunction with Palo Alto Networks firewall logs. For additional endpoint context, you can also use
Cortex
XDR
to collect and alert on endpoint data.
As soon as
Cortex
XDR
starts to receive logs, the app can begin stitching network connection logs with other logs to form network stories.
Cortex
XDR
can also analyze your logs to raise Analytics alerts and can apply IOC, BIOC, and Correlation Rule matching. You can also use queries to search your network connection logs.
To integrate your logs, you first need to set up an applet in a broker VM within your network to act as a Syslog Collector. You then configure forwarding on your log devices to send logs to the Syslog Collector in a CEF format.
  1. Verify that your Cisco ASA firewall meets the following requirements.
    • Syslog in Cisco-ASA format
    • Must include
      timestamps
    • Only supports messages: 302013, 302014, 302015, 302016
  2. Increase log storage for Cisco ASA firewall logs.
    As an estimate for initial sizing, note that the average Cisco ASA log size is roughly 180 bytes. For proper sizing calculations, test the log sizes and log rates produced by your Cisco ASA firewalls. For more information, see Manage Your Log Storage within Cortex XDR.
  3. Configure the Cisco ASA firewall or the log device forwarding logs from it to log to the Syslog Collector in a CEF format.
    Configure your firewall policy to log all traffic and forward the traffic logs to the Syslog Collector in a CEF format. By logging all traffic, you enable
    Cortex
    XDR
    to detect anomalous behavior from Cisco ASA firewall logs. For more information on setting up Log Forwarding on Cisco ASA firewalls, see the Cisco ASA Series documentation.

Recommended For You