GlobalProtect
GlobalProtect 6.3.2 Addressed Issues
Table of Contents
Expand All
|
Collapse All
GlobalProtect Docs
-
- 10.1 & Later
- 9.1 (EoL)
-
- 6.3
- 6.2
- 6.1
- 6.0
- 5.1
-
- 6.1
- 6.0
- 5.1
-
- 6.3
- 6.2
- 6.1
- 6.0
- 5.1
GlobalProtect 6.3.2 Addressed Issues
lists the issues addressed in GlobalProtect app 6.3.2.
The following table lists the issues addressed in GlobalProtect app 6.3.2.
Issue ID | Description |
---|---|
GPC-22087
|
Fixed an issue where the GlobalProtect app was unable to validate the
certificate from OCSP.
|
GPC-22080
|
Fixed an issue where the OCSP requests were being rejected by the
OCSP responder with a HTTP 400 Bad
Request error due to the absence of the Host
header in the OCSP request.
|
GPC-21938
|
Fixed an issue where, when the GlobalProtect app version 6.3.x was
installed on devices running macOS, the HIP check failed to detect
ESET Endpoint Security version 8.
|
GPC-21918
|
Fixed an issue where, when the patch management category was excluded
for HIP checks, HIP checks were still happening for missing patches
which consumed CPU resources on users' machine.
|
GPC-21838
|
Fixed an issue in which the GlobalProtect app, when installed on
Windows devices, caused a duplicate page to open in the system
default browser (Chrome) when the user clicked the hyperlink on the
Welcome page with fedmandate on the embedded browser.
|
GPC-21836
|
Fixed an issue in GlobalProtect 6.3.1 for macOS where the Refresh
Connection option was missing during the
Connecting state, specifically for
users who upgraded from version 6.3.0.
|
GPC-21778
|
Fixed an issue where the GlobalProtect IPSec tunnel got disconnected
on GlobalProtect app version 6.2.5 when gpupdate
/force command was used to update policy.
|
GPC-21774
|
Fixed an issue where the GlobalProtect ARM64 installers for 6.2.5
version did not display the Digital Signatures
tab.
|
GPC-21771
|
Fixed an issue where the GlobalProtect HIP check incorrectly detected
Malware Definition Date for Trend Micro Deep Security Agent, which
caused the device to fail the HIP check.
|
GPC-21733
|
Fixed an issue where all the added portals got deleted from the
portal list except the connected portal when the GlobalProtect app
was upgraded from version 6.2.4 to 6.2.5-788. Users had to manually
add them again to resolve the issue.
|
GPC-21604
|
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS and were connected to the internal gateway,
the app did not display the Disconnect option
under Settings.
|
GPC-21571
|
Fixed an issue where the hyperlink in HIP notification opened up in
Webview2 instead of the default browser.
|
GPC-21565
|
Fixed an issue where the SAML embedded browser did not remember the
username after sign-out, even when the user had selected the check
box Remember Me on the SAML embedded
browser.
|
GPC-21542
|
Fixed an issue where GlobalProtect got stuck in connecting and failed
the connection after some time.
|
GPC-21443
|
Fixed an issue where GlobalProtect crashed when the PanGPS service
was stopped.
|
GPC-21414
|
Fixed an issue where the SAML authentication page would occasionally
fail to appear due to the usage of a previous SAML pre-login cookie.
|
GPC-21399
|
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, the HIP check for the built-in firewall shows
N/A incorrectly.
The value should be either Yes or
No.
|
GPC-21370
|
Fixed an issue where the HIP check could not detect Trellix Firewall
Status, which caused the device to fail the HIP check.
|
GPC-21332
|
Fixed an issue where the GlobalProtect HIP check incorrectly detected
Real Time Protection status for Avast and XProtect, which caused the
device to fail the HIP check.
|
GPC-21320
|
Fixed an issue where the GlobalProtect HIP check did not detect
Kaspersky Endpoint Security antimalware application which caused the
device to fail the HIP check.
|
GPC-21301
|
Fixed an issue where, when the user upgraded the GlobalProtect app
version to 6.2.4 with SAML authentication, users were unable to
connect to GlobalProtect intermittently when Enforcer is
enabled.
|
GPC-21247
|
Fixed an issue where GlobalProtect HIP set the Filevault encryption
status to unencrypted on macOS running devices, which denied access
to the end-point machines.
|
GPC-21222
|
Fixed an issue where the GlobalProtect HIP check incorrectly detected
the Real Time Protection Status and Last Full Scan for Avast
application, which caused the device to fail the HIP check.
|
GPC-21206
|
Fixed an issue where the GlobalProtect service exited when the user
logs off or put the computer in sleep mode.
|
GPC-21174
|
Fixed an issue where the GlobalProtect HIP check did not detect Real
time protection status for Acronis Cyber Protection Agent, which
caused the device to fail the HIP check.
|
GPC-21130
|
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, the GlobalProtect app failed to reconnect and
continued to stay in the Connecting
state after the device woke up from Modern
Standby mode.
|
GPC-21106
|
Fixed an issue where the GlobalProtect HIP check did not detect Real
Time Protection status for Malwarebytes antimalware application,
which caused the device to fail the HIP check.
|
GPC-21043
|
Fixed an issue where the GlobalProtect app got stuck in connecting
stage after authentication when the app was upgraded to 6.2.4
version.
|
GPC-20983
|
Fixed an issue where the GlobalProtect app was installed on devices
running macOS, the GlobalProtect got stuck in Connecting state when
the device woke up from sleep mode.
|
GPC-20967
|
Fixed an issue where, when the GlobalProtect app was installed with
the Conditional Connect method, users had to
click the Connect button twice to connect to
an external gateway after a system reboot.
|
GPC-20943
|
Fixed an issue where the GlobalProtect enforcer blocked DHCP packets.
|
GPC-20838
|
Fixed an issue where the HIP report was not completed within the
allowed time.
|
GPC-20807
|
Fixed an issue where the HIP report for Symantec Encryption Desktop
shows the encryption state as unencrypted.
|
GPC-20779
|
Fixed an issue where Windows regional settings were not respected by
Webview 2 on SAML embedded browser resulting in regional
language(French, German, Chinese, Spanish, and Japanese) not loading
properly in embedded browser.
|
GPC-20700
|
Fixed an issue where macOS users had to enter the SAML username and
password each time they refreshed or rebooted their computer. This
issue occurred more frequently when they used Safari as the default
browser or used the embedded browser.
|
GPC-20674
|
Fixed an issue where all GlobalProtect portals except for the
currently connected portal were deleted during the upgrade from
6.2.2 to 6.2.3 or from 6.2.3 to 6.3.0.
|
GPC-20492
|
Fixed an issue where the PanGPS process crashed due to exception code
0xC0000374.
|
GPC-20466
|
Fixed an issue where the tunnel gets broken during modern standby
when using Enforce GlobalProtect for Network Access and the enforcer
gets re-enabled only after the user resumes working on the
computer.
|
GPC-20441
|
Fixed an issue where HIP reports are sometimes not available on the
firewall for newly connected users.
|
GPC-20322
|
Fixed an issue where users were unable to install GlobalProtect 6.2
on windows 11 ARM64 devices.
|
GPC-20191
|
Fixed an issue where the PanGPA executable version 6.1.2.83 did not
work as expected on Windows devices.
|
GPC-20168
|
Fixed an issue where it was possible to do a privilege escalation
and\or login bypass when using a 3rd party credential provider with
GlobalProtect.
|
GPC-18943
|
Fixed an issue where when Endpoint Traffic enforcement feature was
enabled, certain traffic was going through the physical adapter and
not getting blocked as per the rules set.
|
GPC-18695
|
Fixed an issue where, when the GlobalProtect app version 6.0.7 was
installed on devices running macOS, the "Allow with
Passcode option did not work as expected when the
user tried to disable the GlobalProtect app with the configured
passcode.
|
GPC-18671
|
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, the GlobalProtect macOS install package
created an unused /Library/Application folder.
|
GPC-18452
|
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices, the app did not start right away after a system
reboot.
|