Remote Access VPN (Certificate Profile)

With certificate authentication, the user must present a valid client certificate that identifies them to the GlobalProtect portal or gateway. In addition to the certificate itself, the portal or gateway can use a certificate profile to determine whether the user that sent the certificate is the user to which the certificate was issued.

When a client certificate is the only means of authentication, the certificate that the user presents must contain the username in one of the certificate fields; typically the username corresponds to the common name (CN) in the Subject field of the certificate.

Upon successful authentication, the GlobalProtect app establishes a tunnel with the gateway and is assigned an IP address from the IP pool in the gateway’s tunnel configuration. To support user-based policy enforcement on sessions from the

corp-vpn

zone, the username from the certificate is mapped to the IP address assigned by the gateway. If a security policy requires a domain name in addition to the user name, the domain value specified in the certificate profile is appended to the username.

This quick configuration uses the same topology as GlobalProtect VPN for Remote Access. The only configuration difference is that instead of authenticating users against an external authentication server, this configuration uses client certificate authentication only.

Create Interfaces and Zones for GlobalProtect.
Use the
default
virtual router for all interface configurations to avoid having to create inter-zone routing.
Select
Network
Interfaces
Ethernet
. Configure
ethernet1/2
as a Layer 3 Ethernet interface with IP address
203.0.113.1
, and then assign it to the
l3-untrust
Security Zone
and the default
Virtual Router
.
Create a DNS “A” record that maps IP address
203.0.113.1
to
gp.acme.com
.
Select
Network
Interfaces
Tunnel
and
Add
the
tunnel.2
interface. Add the tunnel interface to a new
Security Zone
called
corp-vpn
, and then assign it to the default
Virtual Router
.
Enable User Identification on the
corp-vpn
zone.
Create security policies to enable traffic flow between the
corp-vpn
zone and the
l3-trust
zone, which enables access to your internal resources.
Select

Policies

Security

, and then

Add

a new rule.

For this example, you would define the rule with the following settings:

Name
(
General
tab)—
VPN Access
Source Zone
(
Source
tab)—
corp-vpn
Destination Zone
(
Destination
tab)—
l3-trust


Use one of the following methods to obtain a server certificate for the interface hosting the GlobalProtect portal and gateway:
(
Recommended
) Import a server certificate from a well-known, third-party CA.
Use the root CA on the portal to generate a self-signed server certificate.
Select
Device
Certificate Management
Certificates
to manage certificates as follows:
Obtain a server certificate. Because the portal and gateway are on the same interface, the same server certificate can be used for both components.
The CN of the certificate must match the FQDN,
gp.acme.com
.
To enable users to connect to the portal without receiving certificate errors, use a server certificate from a public CA.
Issue client certificates to GlobalProtect clients and endpoints.
Use your enterprise PKI or a public CA to issue a unique client certificate to each GlobalProtect user.
Install certificates in the personal certificate store on the endpoints.
Create a client certificate profile.
Select
Device
Certificate Management
Certificate Profile
.
Add
a new certificate profile, and then enter a profile
Name
such as
GP-client-cert
.
Select
Subject
from the
Username Field
drop-down.
In the
CA Certificates
area,
Add
the CA certificate that issued the client certificates. Click
OK
twice.
Configure a GlobalProtect Gateway.
See the topology diagram shown in GlobalProtect VPN for Remote Access.
Select
Network
GlobalProtect
Gateways
, and then
Add
the following configuration:
Interface
—
ethernet1/2
IP Address
—
203.0.113.1
Server Certificate
—
GP-server-cert.pem issued by GoDaddy
Certificate Profile
—
GP-client-cert
Tunnel Interface
—
tunnel.2
IP Pool
—
10.31.32.3 - 10.31.32.118
Configure the GlobalProtect Portals.
Select
Network
GlobalProtect
Portals
, and then
Add
the following configuration:
Set Up Access to the GlobalProtect Portal:
Interface
—
ethernet1/2
IP Address
—
203.0.113.1
Server Certificate
—
GP-server-cert.pem issued by GoDaddy
Certificate Profile
—
GP-client-cert
Define the GlobalProtect Agent Configurations:
Connect Method
—
On-demand
(Manual user initiated connection)
External Gateway Address
—
gp.acme.com
Deploy the GlobalProtect App Software.
Select
Device
GlobalProtect Client
. Follow the procedure to Host App Updates on the Portal.
(
Optional
) Enable use of the GlobalProtect mobile app.
Purchase and install a GlobalProtect subscription (
Device
Licenses
) to enable use of the app.
Save the GlobalProtect configuration.
Click
Commit
.