Install the Prisma SD-WAN ION 1000 in control mode.
Install the Prisma SD-WAN ION 1000 in control
Plan and prepare for cabling and connection of
the ION 1000 to insert it into your network.
Ensure that internet access using a private WAN connection
or direct internet broadband is available at your site to allow
remote configuration of the ION 1000.
Power on the ION 1000 and connect the cables:
Connect the power cable to the power adapter
and the adapter to the ION device.
Next, plug the device power cable into an AC power
outlet. When the device is powered on, the power indicator turns
Connect the internet or WAN or LAN ports:
Connect the ION device port 1 or 2 to a
DHCP-enabled network that has access to the internet, such as an
Internet Service Provider (ISP) cable modem.
If there are no DHCP-enabled networks, access the
console and assign a static
IP on port 1 or 2.
Verify the device connection to the Prisma SD-WAN controller.
Upon successful connection, the controller connectivity
indicator light on the ION device turns to green. The ION device
is now connected to the Prisma SD-WAN controller and displays on
the Prisma SD-WAN console under
Connect to the Prisma SD-WAN console.
Log in to the Prisma SD-WAN console using
the provided login credentials.
that the ION device is listed as Online under