2.3dBi in 800MHz band, 4.4dBi in 1575MHz band,
2.6dBi in 2170MHz band, 1.7dBi in 3300MHz band, 3.8dBi in 4400MHz
band
VSWR
<3:1
Feed Impedance
50Ω
Power Handling
30 dBm
Interface
SMA (F) Connectors
Antenna Dimensions
229 mm x 28 mm x 14 mm (L x W x T)
Secure the antennas to the SMA connectors located
at the corners of the device.
Rotate the antennas at 180-degree movement about the SMA
connectors. Tighten the antennas by hand.
Adjust the antenna orientation to receive optimal signal
strength in your environment.
It is recommended to conduct a cellular location
assessment of the site to receive best signal strength before installing
the
ION
device.
Position the antennas to receive optimal
cellular signal strength. Check the signal strength on the
ION
device
by viewing the Cellular LED signal
strength indicator or on the
Prisma SD-WAN
web interface.
Do not place the antennas close to, or pointing
to one another, or layover one another.
Make
sure the power cables do not cross over the antennas to avoid signal
quality distortion and antenna performance degradation.
When
installing the
ION
on a wall or a desktop, it is recommended to
orient the antennas upright and slanted slightly outwards, not exceeding
45 degrees, to improve the signal quality.