PA-7000 20GQ NPC
Table of Contents
Expand all | Collapse all
-
-
- PA-7000 Series Power Configuration Options
- Determine PA-7000 Series Firewall Power Configuration Requirements
- Connect AC Power to a PA-7050 Firewall
- Connect DC Power to a PA-7050 Firewall
- Connect AC Power to a PA-7080 Firewall
- Connect DC Power to a PA-7080 Firewall
- View PA-7000 Series Firewall Power Statistics
- Connect Cables to a PA-7000 Series Firewall
- Install the PA-7080 Firewall EMI Filter
-
- Replace a PA-7000 Series Firewall Air Filter
- Replace a PA-7000 Series SMC Boot Drive
- Replace a PA-7000 Series Firewall LPC Drive
- Re-Index the LPC Drives
- Replace a PA-7050-SMC-B or PA-7080-SMC-B Drive
- Increase the PA-7000 Series Firewall LPC Log Storage Capacity
PA-7000 20GQ NPC
The PA-7000 20GQ NPC provides 40Gbps
Ethernet connectivity. Use the following topics to learn about the
NPC components and how to interpret the LEDs.
The PA-7000 Series firewall must have PAN-OS 7.0 or later
installed to use the PA-7000-20GQ-NPC.
If you purchase a PA-7050
firewall running a PAN-OS 6.1 or earlier release and you only have
a PA-7000-20GQ available (or, if you have more than one NPC and
all are this model), refer to KB article 9729 before attempting
to upgrade to a PAN-OS 7.0 or later release.