PA-7050 Power Supply LEDs

Use the following information to learn how to interpret the LEDs on the PA-7050 AC power supply.
LEDs
Description
  • AC (Input)
    —Green indicates that the power supply input is within normal limits, blinking indicates power input is out of normal limits, and off indicates no power input.
  • DC (Output)
    —Green indicates that the power supply DC output to the chassis components are within normal limits, blinking indicates power overload, and off indicates no DC output power.
  • FLT (Fault)
    —Red indicates a power supply failure, blinking indicates that the management plane cannot communicate with the power supply, and off indicates no issues.
The following table describes the PA-7050 DC power supply LEDs.
LEDs
Description
The LEDs on the power supply are not labeled. The following descriptions list the LEDs from left to right.
  • Input
    —Green indicates that the power supply input is within normal limits, blinking indicates power input is out of normal power limits, and off indicates no power input.
  • Output
    —Green indicates that the power supply DC output to the chassis components are within normal limits, blinking indicates power overload, and off indicates no DC output power.
  • Fault
    —Red indicates a power supply failure, blinking indicates that the management plane cannot communicate with the power supply and off indicates no issues.

Recommended For You