Table of Contents
LLDP
Getting started with LLDP model using PAN-OS OpenConfig
plugin.
Review the deviation file before using the
openconfig-lldp model to familiarize yourself with supported paths.
When using the LLDP model with PAN-OS firewalls:
- Doing a Get on the lldp/interfaces path retrieves all consolidated information for the aggregated ethernet interface members and other interfaces.
- You can direct gNMI calls to aggregate ethernet interfaces, but not to specific members of the aggregate interface.
- When an interface has LLDP disabled, the interface counters are shown as all zeros.
- Deleting an LLDP configuration will set the /lldp/config/enabled value back to false.
- lldp/state/hello-timer is the transit interval in PAN-OS.
- Below is the matching of counter from OpenConfig to PAN-OS at the lldp/interfaces/interface/state/counters level:
OpenConfig fields PAN-OS field frame-in Total Received frame-out Total Transmitted frame-error-in Errors frame-discard Errors tlv-discard Dropped TLV frame-error-out Dropped Transmit
Review the LLDP YANG deviation file before using the
openconfig-lldp model to familiarize yourself with supported paths.
Globally Enable LLDP
The example shows a gNMI call that globally enables LLDP:
gnmic -a 10.1.1.1 --port 9339 -u admin -p password --skip-verify -e JSON_IETF --timeout 300s set --update /lldp/enabled:::bool:::true
A successful update request returns:
Set Response: { "timestamp": 1619041389507147469, "time": "2021-04-21T14:43:09.507147469-07:00", "results": [ { "operation": "UPDATE", "path": "lldp/enabled" } ] }
Enable LLDP for Aggregate Interface
This example shows a gNMI call that enables an individual aggregate ethernet
interface.
gnmic -a 10.1.1.1 --port 9339 -u admin -p password --skip-verify -e JSON_IETF --timeout 300s set --update /lldp/interfaces/interface[name=ae1]/enabled:::bool:::true
A successful update request returns:
{ "timestamp": 1619041489486221608, "time": "2021-04-21T14:44:49.486221608-07:00", "results": [ { "operation": "UPDATE", "path": "lldp/interfaces/interface[name=ae1]/enabled" } ] }
Retrieving LLDP Configuration
You can retrieve LLDP state information and global configuration information by using
the following command:
gnmic -a 10.1.1.1 --port 9339 -u admin -p password --skip-verify -e JSON_IETF --timeout 300s get --path /lldp/
[ { "timestamp": 1619040961585845211, "time": "2021-04-21T14:36:01.585845211-07:00", "updates": [ { "Path": "lldp", "values": { "lldp": { "config": { "enabled": false, "hello-timer": "30" }, "openconfig-lldp:interfaces": { "interface": [ { "config": { "enabled": true, "name": "ae1" }, "name": "ae1", "state": { "counters": { "frame-discard": "0", "frame-error-in": "0", "frame-error-out": "0", "frame-in": "0", "frame-out": "0", "tlv-discard": "0" }, "enabled": true, "name": "ae1" } }, Truncated
