Device > Server Profiles > LDAP
- DeviceServer ProfilesLDAP
- PanoramaServer ProfilesLDAP
Addor select an LDAP Server Profile to configure settings for the Lightweight Directory Access Protocol (LDAP) servers that authentication profiles reference (see Device > Authentication Profile). You can use LDAP to authenticate end users who access your network resources (through GlobalProtect or Authentication Portal) and administrators defined locally on the firewall or Panorama.
LDAP Server Settings
Enter a name to identify the profile (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Select the scope in which the profile is available. In the context of a firewall that has more than one virtual system (vsys), select a vsys or select
Shared(all virtual systems). In any other context, you can’t select the
Location; its value is predefined as Shared (
firewalls) or as Panorama. After you save the profile, you can’t change its
Administrator Use Only
Select this option to specify that only administrator accounts can use the profile for authentication. For firewalls that have multiple virtual systems, this option appears only if the
Use this profile for serial number check
Select this option to enable this LDAP server profile to collect serial numbers from managed endpoints. This information is used by the GlobalProtect portal and gateway to verify whether the endpoint is managed (serial number exists in the Active Directory) or not.
For each LDAP server,
Name, IP address or FQDN (
LDAP Server), and
Port(default is 389).
Configure at least two LDAP servers to provide redundancy.
Choose the server type from the drop-down.
Specify the root context in the directory server to narrow the search for user or group information.
Specify the login name (Distinguished Name) for the directory server.
The Bind DN account must have permission to read the LDAP directory.
Specify the bind account password. The agent saves the encrypted password in the configuration file.
Specify the time limit (in seconds) imposed when connecting to the directory server (range is 1 to 30; default is 30).
Specify the time limit (in seconds) imposed when performing directory searches (range is 1 to 30; default is 30).
Specify the interval (in seconds) after which the system will try to connect to the LDAP server after a previous failed attempt (range is 1 to 3,600; default is 60).
Require SSL/TLS secured connection
Select this option if you want the firewall to use SSL or TLS for communications with the directory server. The protocol depends on the server port:
This option is a best practice because it increases security and is selected by default.
Verify Server Certificate for SSL sessions
Select this option (cleared by default) if you want the firewall to verify the certificate that the directory server presents for SSL/TLS connections. The firewall verifies the certificate in two respects:
If the verification fails, the connection fails. To enable this verification, you must also select
Require SSL/TLS secured connection.
Enable the firewall to verify the server certificate for SSL sessions to increase security.
Recommended For You
Recommended videos not found.