Before configuring a firewall interface as a DHCP relayagent,
make sure you have configured a Layer 3 Ethernet or Layer
3 VLAN interface and that you assigned the interface to a virtual
router and a zone. You want that interface to be able to pass DHCP
messages between clients and servers. Each interface can forward
messages to a maximum of eight external IPv4 DHCP servers and eight
external IPv6 DHCP servers. A client sends a DHCPDISCOVER message
to all configured servers, and the firewall relays the DHCPOFFER
message of the first server that responds back to the requesting
DHCP Relay Settings
Name of the interface that will be the DHCP
IPv4 / IPv6
Select the type of DHCP server and IP address
you will specify.
DHCP Server IP Address
Enter the IP address of the DHCP server
to and from which you will relay DHCP messages.
If you selected IPv6 as the IP address protocol
for the DHCP server and specified a multicast address, you must
also specify an outgoing interface.