Routing connection test fields in the web interface.
Select the connectivity test to execute.
) Select device
specify which devices and virtual systems for which to test the
policy functionality. Admin and device group & Template users
are presented with the devices and virtual systems based on their
access domain. Additionally, you can select the Panorama management
server as a device.
) Selected Devices
Lists the devices and virtual systems selected
FiB Lookup, Mfib Lookup
Select one of the following for Lookup:
—Perform route lookup within activate route table
—Perform multicast route lookup within active
Enter the IP address for which the traffic
is intended .
Specific virtual router within which the
routing test is performed. Select the virtual router from the drop-down.
Enter the specific IP address from which
the traffic originated.
Enter the specific port from which the traffic
Enter the specific IP address for which
the traffic is intended.
Enter the specific destination port for
which the traffic is intended.
Select to view the Result Details of the
) When executing the
test for multiple managed devices, the Results display the following
information for each device tested:
of the device group to which the firewall that is processing traffic
Firewall—Name of the firewall that is processing traffic
Status—Indicates the status of the test:
Result—Displays the test result. If the test could not be performed,
one of the following is displayed: