Configure a logical router to obtain routes to other
subnets using either static routes or BGP.
The firewall requires a logical router
to obtain routes to other subnets either using static routes that
you manually define, or through participation in Layer 3 routing
protocols (dynamic routes). Each Layer 3 interface, loopback interface,
and VLAN interface defined on the firewall must be associated with
a logical router. Each interface can belong to only one logical
The logical router is available after you enable
in the General Settings of
then commit and reboot the firewall.
The Advanced Route Engine is currently in preview mode
only and provides a limited feature set.
Defining a logical router requires that you add Layer 3 interfaces
to the logical router and configure any combination of static routes
and BGP routing, as required by your network. You can also configure
other features, such as ECMP.