Update a Virtual Router (REST API)

REST API requests for a virtual router
A virtual router allows the firewall to route traffic from one network to another through its Layer 3 interfaces or static routes. Each Layer 3 interface, loopback interface, and VLAN interface defined on the firewall must be associated with a virtual router. Each interface can belong to only one virtual router.
The following steps show how to add an existing Ethernet interface to the predefined virtual router,
  1. Retrieve the existing virtual router named default.
    Before you update an existing virtual router by adding a new interface, you should retrieve the virtual router to identify interfaces that are already assigned to that virtual router.
    curl -X GET 'https://<firewall>/restapi/v10.2/Network/VirtualRouters' --header 'X-PAN-KEY: <api-key>’
    A successful response returns a list of existing virtual routers and includes detailed information for each one. The response object for this request is large, so the example response below shows a partial response object. You can see the list of existing interfaces, which will be necessary to include as request body parameters if you are updating the interface list in the virtual router.
    {"@status": "success","@code": "19","result": {"@count": "1","entry": [ {"@name": "default","@location": "panorama-pushed","interface": {"member": ["ethernet1/4" ] },"routing-table": {}, “multicast”: {}, “protocol”: {}, “admin-dists”: {}, “ecmp”: {} } ] } }
  2. Update the existing virtual router named
    Update the virtual router
    with a new L3 Ethernet interface,
    , through a PUT request. Include any interfaces that currently exist in the default Virtual Router in your PUT request.
    curl --location --request PUT 'https://<firewall>/restapi/v10.2/Network/VirtualRouters?name=default' --header 'X-PAN-Key:<api-key> --data '{ "entry": { "@name": "default", "interface": { "member": [ "ethernet1/3", "ethernet1/4" ] } } }'

Recommended For You