PAN-OS 10.2.9 Known Issues
Focus
Focus

PAN-OS 10.2.9 Known Issues

Table of Contents

PAN-OS 10.2.9 Known Issues

PAN-OSĀ® 10.2.9 known issues.
The following list includes only outstanding known issues specific to PAN-OSĀ® 10.2.9. This list includes issues specific to Panoramaā„¢, GlobalProtectā„¢, VM-Series plugins, and WildFireĀ®, as well as known issues that apply more generally or that are not identified by an issue ID.
Issue ID
Description
WF500-5854
The WildFire analysis report on the firewall log viewer (MonitoringWildFire Submissions) does not display the following data fields: File Type, SHA-256, MD-5, and File Size".
Workaround: Download and open the WildFire analysis report in the PDF format using the link in the upper right-hand corner of the Detailed Log View.
WF500-5843
In a WildFire appliance cluster, issuing the show cluster-all peers CLI command when a node within the cluster is being rebooted generates the following error: Server error : An error occured.
WF500-5840
The sample analysis statistics that are returned when issuing the show wildfire local statistics CLI command in WildFire appliance cluster deployments may not accurately reflect the number of samples that have been processed.
WF500-5823
The following WildFire appliance CLI command does not return a signature generation status as expected: show wildfire global signature-status. This does not corrupt or otherwise prevent the WildFire appliance from analyzing a sample.
WF500-5781
The WildFire appliance might erroneously generate and log the following device certification error: Device certificate is missing or invalid. It cannot be renewed.
WF500-5754
In WildFire appliance clusters, issuing the show cluster controller CLI command generates an error when an IPv6 address is configured for the management interface but not for the cluster interface.
Workaround: Ensure all WildFire appliance interfaces that are enabled use matching protocols (all IPv4 or all IPv6).
WF500-5632
The number of registered WildFire appliances reported in Panorama (PanoramaManaged WildFire AppliancesFirewalls ConnectedView) does not accurately reflect the current status of connected WildFire appliances.
PAN-263226 (PAN-OS 10.2.9-h9 only)
When SSL decryption is enabled and Client Hello messages span multiple TCP segments, elements from the proxy_l2info memory pool may not be freed properly. Memory leaks in this pool cause some SSL decryption sessions to fail.
Workaround: Disable Client Hello accumulation using the debug dataplane set ssl-decrypt accumulate-client-hello disable yes CLI command.
PAN-260851
From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (ObjectsApplications) tag.
PAN-259769
GlobalProtect portal is not accessible via a web browser and the app displays the error ERR_EMPTY_RESPONSE.
PAN-251895
This issue is now resolved. See PAN-OS 10.2.10 Addressed Issues.
When Inline Cloud Analysis features are enabled, the firewall experiences a slow packet buffer leak, resulting in poor performance and dropped traffic.
Workaround: Disable WildFire Inline Cloud Analysis and Advanced Threat Prevention Inline Cloud Analysis on the firewall.
PAN-251639
This issue is now resolved. See. PAN-OS 10.2.9-h9 Addressed Issues.
This issue is now resolved. See PAN-OS 10.2.10 Addressed Issues.
An out of memory condition might occur due to a memory leak in the varrcvr process when a Wildfire Analysis security profile is enabled.
PAN-234015
The X-Forwarded-For (XFF) value is not displayed in traffic logs.
PAN-223365
The Panorama management server is unable to query any logs if the ElasticSearch health status for any Log Collector (PanoramaManaged Collector is degraded.
Workaround: Log in to the Log Collector CLI and restart ElasticSearch.
admindebug elasticsearch es-restart all
PAN-229865
Upgrading a PA-220 firewall running a PAN-OS 10.1 release fails when the target PAN-OS upgrade version is PAN-OS 10.2.5.
Workaround: On your upgrade path to PAN-OS 10.2.5, first upgrade to PAN-OS 10.2.4 and then upgrade to PAN-OS 10.2.5.
PAN-223677
(PA-3410, PA-3420, PA-3430, PA-3440, PA-5410, PA-5420, and PA-5430 firewalls) By enabling Lockless QoS feature, a slight degradation in App-ID and Threat performance is expected.
PAN-222586
On PA-5410, PA-5420, and PA-5430 firewalls, the Filter dropdown menus, Forward Methods, and Built-In Actions for Correlation Log settings (DeviceLog Settings) are not displayed and cannot be configured.
PAN-221775
A Malformed Request error is displayed when you Test Connection for an email server profile (DeviceServer ProfilesEmail) using SMTP over TLS and the Password includes an ampersand (&).
PAN-217307
This issue is now resolved. See PAN-OS 10.2.11 Addressed Issues.
The following Security policy rule (PoliciesSecurity) filters return no results:
log-start eq no
log-end eq no
log-end eq yes
PAN-213746
On the Panorama management server, the Hostkey displayed as undefined undefined if you override an SSH Service Profile (DeviceCertificate ManagementSSH Service Profile) Hostkey configured in a Template from the Template Stack.
PAN-213119
PA-5410 and PA-5420 firewalls display the following error when you view the Block IP list (MonitorBlock IP):
show -> dis-block-table is unexpected
PAN-212889
On the Panorama management server, different threat names are used when querying the same threat in the Threat Monitor (MonitorApp ScopeThreat Monitor) and ACC. This results in the ACC displaying no data to display when you are redirected to the ACC after clicking a threat name in the Threat Monitor and filtering the same threat name in the Global Filters.
PAN-212533
Modifying the Administrator Type for an existing administrator (DeviceAdministrators or PanoramaAdministrators) from Superuser to a Role-Based custom admin, or vice versa, does not modify the access privileges of the administrator.
PAN-211531
On the Panorama management server, admins can still perform a selective push to managed firewalls when Push All Changes and Push for Other Admins are disabled in the admin role profile (PanoramaAdmin Roles).
PAN-209288
Certificates are not successfully generated using SCEP (DeviceCertificate ManagementSCEP).
PAN-208622
A file upload to Box.com exceeding 6 files gets stuck and fails to upload if you specify an Enterprise DLP data filtering profile (ObjectsDLPData Filtering Profiles with the Action set to Block to a Security policy rule (PoliciesSecurity).
PAN-204689
Upon upgrade to PAN-OS 10.2.4, the following GlobalProtect settings do not work:
  • Allow user to disconnect GlobalProtect AppAllow with Passcode
  • Allow user to Disable GlobalProtect AppAllow with Passcode
  • Allow User to Uninstall GlobalProtect AppAllow with Password
PAN-196758
On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you Preview Changes (CommitPush to DevicesEdit Selections or CommitCommit and PushEdit Selections).
PAN-196504
License deactivation fails for VM-Series firewalls licensed using PA-VM Bundle 3 (BND3).
PAN-194996
When using a 10.2.2 Panorama to manage a Panorama Managed Prisma Access 3.1.2 deployment, allocating bandwidth for a remote network deployment fails (the OK button is grayed out).
Workaround: Retry the operation.
PAN-194519
(PA-5450 firewall only) Trying to configure a custom payload format under DeviceServer ProfilesHTTP yields a Javascript error.
PAN-194515
(PA-5450 firewall only) The Panorama web interface does not display any predefined template stack variables in the dropdown menu under DeviceSetupLog InterfaceIP Address.
Workaround: Configure the log interface IP address on the individual firewall web interface instead of on Panorama.
PAN-194424
(PA-5450 firewall only) Upgrading to PAN-OS 10.2.2 while having a log interface configured can cause both the log interface and the management interface to remain connected to the log collector.
Workaround: Restart the log receiver service by running the following CLI command:
debug software restart process log-receiver
PAN-194202
(PA-5450 firewall only) If the management interface and logging interface are configured on the same subnetwork, the firewall conducts log forwarding using the management interface instead of the logging interface.
PAN-190727
(PA-5450 firewall only) Documentation for configuring the log interface is unavailable on the web interface and in the PAN-OS Administratorā€™s Guide.
PAN-189111
After deleting an MP pod and it comes up, the show routing command output appears empty and traffic stops working.
PAN-189076
On a firewall with Advanced Routing enabled, OSPFv3 peers using a broadcast link and a designated router (DR) priority of 0 (zero) are stuck in a two-way state after HA failover.
Workaround: Configure at least one OSPFv3 neighbor with a non-zero priority setting in the same broadcast domain.
PAN-188358
After triggering a soft reboot on a M-700 appliance, the Management port LEDs do not light up when a 10G Ethernet cable is plugged in.
PAN-187685
On the Panorama management server, the Template Status displays no synchronization status (PanoramaManaged DevicesSummary) after a bootstrapped firewall is successfully added to Panorama.
Workaround: After the bootstrapped firewall is successfully added to Panorama, log in to the Panorama web interface and select CommitPush to Devices.
PAN-187643
If you enable SCTP security using a Panorama template when SCTP INIT Flood Protection is enabled in the Zone Protection profile using Panorama and you commit all changes, the commit is successful but the SCTP INIT option is not available in the Zone Protection profile.
Workaround: Log out of the firewall and log in again to make the SCIT INIT option available on the web interface.
PAN-187612
On the Panorama management server, not all data profiles (ObjectsDLP Data Filtering Profiles) are displayed after you:
  • Upgrade Panorama to PAN-OS 10.2 and upgrade the Enterprise DLP plugin to version 3.0.
  • Downgrade Panorama to PAN-OS 10.1 and downgrade the Enterprise DLP plugin to version 1.0.
Workaround: Log in to the Panorama CLI and reset the DLP plugin.
admin > request plugins dlp reset
PAN-187407
The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to Hold client request for category lookup and the action set to Reset-Both and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed.
PAN-187370
On a firewall with Advanced Routing enabled, if there is also a logical router instance that uses the default configuration and has no interfaces assigned to it, this will result in terminating the management daemon and main routing daemon in the firewall during commit.
Workaround: Do not use a logical router instance with no interfaces bound to it.
PAN-186283
Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS.
Workaround: Use CommitPush to Devices to synchronize the templates.
PAN-186282
On HA deployments on AWS and Azure, Panorama fails to populate match criteria automatically when adding dynamic address groups.
Workaround: Reboot the Panorama HA pair.
PAN-184406
Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash.
Workaround: Contact customer support to stop the dmdb process before adding a RAID disk pair to a M-700 appliance.
PAN-183404
Static IP addresses are not recognized when "and" operators are used with IP CIDR range.
PAN-181933
If you use multiple log forwarding cards (LFCs) on the PA-7000 series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs.
PAN-181823
On a PA-5400 Series firewall (minus the PA-5450), setting the peer port to forced 10M or 100M speed causes any multi-gigabit RJ-45 ports on the firewall to go down if they are set to Auto.
PAN-180661
On the Panorama management server, pushing an unsupported Minimum Password Complexity (DeviceSetupManagement) to a managed firewall erroneously displays commit time out as the reason the commit failed.
PAN-180104
When upgrading a CN-Series as a DaemonSet deployment to PAN-OS 10.2, CN-NGFW pods fail to connect to CN-MGMT pod if the Kubernetes cluster previously had a CN-Series as a DaemonSet deployment running PAN-OS 10.0 or 10.1.
Workaround: Reboot the worker nodes before upgrading to PAN-OS 10.2.
PAN-178194
A user interface issue in PAN-OS renders the contents of the Inline ML tab in the URL Filtering Profile inaccessible on firewalls licensed for Advanced URL Filtering. Additionally, a message indicating that a License required for URL filtering to function is unavailable displays at the bottom of the UI. These errors do not affect the operation of Advanced URL Filtering or URL Filtering Inline ML.
Workaround: Configuration settings for URL Filtering Inline ML must be applied through the CLI. The following configuration commands are available:
  • Define URL exceptions for specific web sitesā€”
    admin# set profiles url-filtering <url_filtering_profile_name> mlav-category-exception
  • Configuration settings for each inline ML modelā€”
    admin# set profiles url-filtering <url_filtering_profile_name> mlav-engine-urlbased-enabled
PAN-177455
PAN-OS 10.2.0 is not supported on PA-7000 Series firewalls with HA (High Availability) clustering enabled and using an HA4 communication link. Attempting to load PAN-OS 10.2.0 on the firewall causes the PA-7000 100G NPC to go offline. As a result, the firewall fails to boot normally and enters maintenance mode. HA Pairs of Active-Passive and Active-Active firewalls are not affected.
PAN-175915
When the firewall is deployed on N3 and N11 interfaces in 5G networks and 5G-HTTP/2 traffic inspection is enabled in the Mobile Network Protection Profile, the traffic logs do not display network slice SST and SD values.
PAN-174982
In HA active/active configurations where, when interfaces that were associated with a virtual router were deleted, the configuration change did not sync.
PAN-172274
When you activate the advanced URL filtering license, your license entitlements for PAN-DB and advanced URL filtering might not display correctly on the firewall ā€” this is a display anomaly, not a licensing issue, and does not affect access to the services.
Workaround: Issue the following command to retrieve and update the licenses: license request fetch.
PAN-171938
No results are displayed when you Show Application Filter for a Security policy rule (PoliciesSecurityApplicationValueShow Application Filter).
PAN-164885
This issue is now resolved. See PAN-OS 10.2.10 Addressed Issues.
On the Panorama management server, pushes to managed firewalls (CommitPush to Devices or Commit and Push) may fail when an EDL (ObjectsExternal Dynamic Lists) is configured to Check for updates every 5 minutes due to the commit and EDL fetch processes overlapping. This is more likely to occur when multiple EDLs are configured to check for updates every 5 minutes.