>
    IEEE 802.3 LAG MIB
    Focus
    Download PDF
    Focus
    1. Home
    2. PAN-OS
    3. Monitoring
    4. SNMP Monitoring and Traps
    5. Supported MIBs
    6. IEEE 802.3 LAG MIB
    Download PDF

    IEEE 802.3 LAG MIB

    Table of Contents

    IEEE 802.3 LAG MIB

    Use the IEEE 802.3 LAG MIB to monitor the status of aggregate groups that have Link Aggregation Control Protocol (LACP in an Aggregate Interface Group) enabled. When the firewall logs LACP events, it also generates traps that are useful for troubleshooting. For example, the traps can tell you whether traffic interruptions between the firewall and an LACP peer resulted from lost connectivity or from mismatched interface speed and duplex values.
    PAN-OS implements the following SNMP tables for LACP.
    The dot3adTablesLastChanged object indicates the time of the most recent change to dot3adAggTable, dot3adAggPortListTable, and dot3adAggPortTable.
    Table
    Description
    Aggregator Configuration Table (dot3adAggTable)
    This table contains information about every aggregate group that is associated with a firewall. Each aggregate group has one entry.
    Some table objects have restrictions, which the dot3adAggIndex object describes. This index is the unique identifier that the local system assigns to the aggregate group. It identifies an aggregate group instance among the subordinate managed objects of the containing object. The identifier is read-only.
    The ifTable MIB (a list of interface entries) does not support logical interfaces and therefore does not have an entry for the aggregate group.
    Aggregation Port List Table (dot3adAggPortListTable)
    This table lists the ports associated with each aggregate group in a firewall. Each aggregate group has one entry.
    The dot3adAggPortListPorts attribute lists the complete set of ports associated with an aggregate group. Each bit set in the list represents a port member. For non-chassis platforms, this is a 64-bit value. For chassis platforms, the value is an array of eight 64-bit entries.
    Aggregation Port Table (dot3adAggPortTable)
    This table contains LACP configuration information about every port associated with an aggregate group in a firewall. Each port has one entry. The table has no entries for ports that are not associated with an aggregate group.
    LACP Statistics Table (dot3adAggPortStatsTable)
    This table contains link aggregation information about every port associated with an aggregate group in a firewall. Each port has one row. The table has no entries for ports that are not associated with an aggregate group.
    The IEEE 802.3 LAG MIB includes the following LACP-related traps:
    Trap Name
    Description
    panLACPLostConnectivityTrap
    The peer lost connectivity to the firewall.
    panLACPUnresponsiveTrap
    The peer does not respond to the firewall.
    panLACPNegoFailTrap
    LACP negotiation with the peer failed.
    panLACPSpeedDuplexTrap
    The link speed and duplex settings on the firewall and peer do not match.
    panLACPLinkDownTrap
    An interface in the aggregate group is down.
    panLACPLacpDownTrap
    An interface was removed from the aggregate group.
    panLACPLacpUpTrap
    An interface was added to the aggregate group.
    For the MIB definitions, refer to IEEE 802.3 LAG MIB.

    © 2024 Palo Alto Networks, Inc. All rights reserved.