Focus

PAN-OS Web Interface Help

Device > Server Profiles > Kerberos

Table of Contents

Device > Server Profiles > Kerberos

Select DeviceServer ProfilesKerberos or PanoramaServer ProfilesKerberos to configure a server profile

that enables users to natively authenticate to an Active Directory domain controller or a Kerberos V5-compliant authentication server. After configuring a Kerberos server profile you can assign it to an authentication profile (see Device > Authentication Profile). You can use Kerberos to authenticate end users who access your network resources (through GlobalProtect or Authentication Portal) and administrators defined locally on the firewall or Panorama.

To use Kerberos authentication, your back-end Kerberos server must be accessible over an IPv4 address. IPv6 addresses are not supported.

Kerberos Server Settings	Description
Profile Name	Enter a name to identify the server (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Location	Select the scope in which the profile is available. In the context of a firewall that has more than one virtual system (vsys), select a vsys or select Shared (all virtual systems). In any other context, you can’t select the Location; its value is predefined as Shared (`firewalls`) or as Panorama. After you save the profile, you can’t change its Location.
Administrator Use Only	Select this option to specify that only administrator accounts can use the profile for authentication. For firewalls that have multiple virtual systems, this option appears only if the Location is Shared.
Servers	For each Kerberos server, click Add and specify the following settings: Name—Enter a name for the server. Kerberos Server—Enter the server IPv4 address or FQDN. Port—Enter an optional port (range is 1 to 65,535; default is 88) for communication with the server.

Device > Server Profiles > LDAP

Device > Server Profiles > SAML Identity Provider