Focus

PAN-OS Web Interface Help

BGP Redist Rules Tab

Table of Contents

BGP Redist Rules Tab

Network > Virtual Router > BGP > Redist Rules

Configure the settings described in the following table to create rules for redistributing BGP routes.

BGP Redistribution Rules Settings	Configure In	Description
Allow Redistribute Default Route	BGPRedist Rules	Permits the firewall to redistribute its default route to BGP peers.
Name		Add an IP subnet or create a redistribution rule first.
Enable		Select to enable this redistribution rule.
Route Table		Specify which route table the route will be redistributed into: unicast, multicast, or both.
Metric		Enter a metric in the range 1-65,535.
Set Origin		Select the origin for the redistributed route (igp, egp, or incomplete). The value incomplete indicates a connected route.
Set MED		Enter a MED for the redistributed route in the range 0-4,294,967,295.
Set Local Preference		Enter a local preference for the redistributed route in the range 0-4,294,967,295.
Set AS Path Limit		Enter an AS path limit for the redistributed route in the range 1-255.
Set Community		Select or enter a 32-bit value in decimal or hexadecimal or in AS:VAL format; AS and VAL are each in the range 0-65,535. Enter a maximum of 10 communities.
Set Extended Community		Enter a 64-bit value in hexadecimal or in TYPE:AS:VAL or TYPE:IP:VAL format. TYPE is 16 bits; AS or IP is 16 bits; VAL is 32 bits. Enter a maximum of five extended communities.

BGP Aggregate Tab