Focus

PAN-OS Web Interface Help

BGP Tab

Table of Contents

BGP Tab

The following table describes the virtual router’s Runtime Stats for BGP.

BGP Runtime Stats	Description
Summary Tab
Router Id	Router ID assigned to the BGP instance.
Reject Default Route	Indicates whether the Reject Default Route option is configured, which causes the VR to ignore any default routes that are advertised by BGP peers.
Redistribute Default Route	Indicates whether the Allow Redistribute Default Route option is configured.
Install Route	Indicates whether the Install Route option is configured, which causes the VR to install BGP routes in the global routing table.
Graceful Restart	Indicates whether or not Graceful Restart is enabled (support).
AS Size	Indicates whether the AS Format size selected is 2 Byte or 4 Byte.
Local AS	Number of the AS to which the VR belongs.
Local Member AS	Local Member AS number (valid only if the VR is in a confederation). The field is 0 if the VR is not in a confederation.
Cluster ID	Displays the Reflector Cluster ID configured.
Default Local Preference	Displays the Default Local Preference configured for the VR.
Always Compare MED	Indicates whether the Always Compare MED option is configured, which enables a comparison to choose between routes from neighbors in different autonomous systems.
Aggregate Regardless MED	Indicates whether the Aggregate MED option is configured, which enables route aggregation even when routes have different MED values.
Deterministic MED Processing	Indicates whether the Deterministic MED comparison option is configured, which enables a comparison to choose between routes that are advertised by IBGP peers (BGP peers in the same AS).
Current RIB Out Entries	Number of entries in the RIB Out table.
Peak RIB Out Entries	Peak number of Adj-RIB-Out routes that have been allocated at any one time.
Peer Tab
Name	Name of the peer.
Group	Name of the peer group to which this peer belongs.
Local IP	IP address of the BGP interface on the VR.
Peer IP	IP address of the peer.
Peer AS	Autonomous system to which the peer belongs.
Password Set	Yes or no indicates whether authentication is set.
Status	Status of the peer, such as Active, Connect, Established, Idle, OpenConfirm, or OpenSent.
Status Duration (secs.)	Duration of the peer’s status.
Peer Group Tab
Group Name	Name of a peer group.
Type	Type of peer group configured, such as EBGP or IBGP.
Aggregate Confed. AS	Yes or no indicates whether the Aggregate Confederation AS option is configured.
Soft Reset Support	Yes or no indicates whether the peer group supports soft reset. When routing policies to a BGP peer change, routing table updates might be affected. A soft reset of BGP sessions is preferred over a hard reset because a soft reset allows routing tables to be updated without clearing the BGP sessions.
Next Hop Self	Yes or no indicates whether this option is configured.
Next Hop Third Party	Yes or no indicates whether this option is configured.
Remove Private AS	Indicates whether updates will have private AS numbers removed from the AS_PATH attribute before the update is sent.
Local RIB Tab
Prefix	Network prefix and subnet mask in the Local Routing Information Base.
Flag	* indicates the route was chosen as the best BGP route.
Next Hop	IP address of the next hop toward the Prefix.
Peer	Name of peer.
Weight	Weight attribute assigned to the Prefix. If the firewall has more than one route to the same Prefix, the route with the highest weight is installed in the IP routing table.
Local Pref.	Local preference attribute for the route, which is used to choose the exit point toward the prefix if there are multiple exit points. A higher local preference is preferred over a lower local preference.
AS Path	List of autonomous systems in the path to the Prefix network; the list is advertised in BGP updates.
Origin	Origin attribute for the Prefix; how BGP learned of the route.
MED	Multi-Exit Discriminator (MED) attribute of the route. The MED is a metric attribute for a route, which the AS advertising the route suggests to an external AS. A lower MED is preferred over a higher MED.
Flap Count	Number of flaps for the route.
RIB Out Tab
Prefix	Network routing entry in the Routing Information Base.
Next Hop	IP address of the next hop toward the Prefix.
Peer	Peer to which the VR will advertise this route.
Local Pref.	Local preference attribute to access the prefix, which is used to choose the exit point toward the prefix if there are multiple exit points. A higher local preference is preferred over a lower local preference.
AS Path	List of autonomous systems in the path to the Prefix network.
Origin	Origin attribute for the Prefix; how BGP learned of the route.
MED	Multi-Exit Discriminator (MED) attribute to the Prefix. The MED is a metric attribute for a route, which the AS that is advertising the route suggests to an external AS. A lower MED is preferred over a higher MED.
Adv. Status	Advertised status of the route.
Aggr. Status	Indicates whether this route is aggregated with other routes.

RIP Tab

Multicast Tab