Focus

PAN-OS Web Interface Help

RIP

Table of Contents

RIP

Network > Virtual Routers > RIP

Configuring the Routing Information Protocol (RIP) includes the following general settings:

RIP Settings	Description
Enable	Select to enable RIP.
Reject Default Route	(`Recommended`) Select if you do not want to learn any default routes through RIP.
BFD	To enable Bidirectional Forwarding Detection (BFD) for RIP globally for the virtual router on a PA-400 Seres, PA-3200 Series, PA-3400 Series, PA-5200 Series, PA-5400 Series, PA-7000 Series, and VM-Series firewall, select one of the following: default (profile with the default BFD settings) a BFD profile that you have created on the firewall New BFD Profile to create a new BFD profile Select None (Disable BFD) to disable BFD for all RIP interfaces on the virtual router; you cannot enable BFD for a single RIP interface.

In addition, RIP settings on the following tabs must be configured:

Interfaces: See RIP Interfaces Tab.
Timers: See RIP Timers Tab.
Auth Profiles: See RIP Auth Profiles Tab.
Export Rules: See RIP Export Rules Tab.

Route Redistribution

RIP Interfaces Tab