Focus

PAN-OS Web Interface Help

Panorama > Scheduled Config Export

Table of Contents

Panorama > Scheduled Config Export

To schedule an export of all the running configurations on Panorama and firewalls, Add an export task and configure the settings as described in the following table.

If Panorama has a high availability (HA) configuration, you must perform these instructions on each peer to ensure the scheduled exports continue after a failover. Panorama does not synchronize scheduled configuration exports between HA peers.

Scheduled Configuration Export Settings	Description
Name	Enter a name to identify the configuration export job (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, hyphens, and underscores.
Description	Enter an optional description.
Enable	Select to enable the export job.
Scheduled export start time (daily)	Specify the time of day to start the export (24 hour clock, format HH:MM).
Protocol	Select the protocol to use to export logs from Panorama to a remote host. Secure Copy (SCP) is a secure protocol; FTP is not.
Hostname	Enter the IP address or hostname of the target SCP or FTP server.
Port	Enter the port number on the target server.
Path	Specify the path to the folder or directory on the target server that will store the exported configuration. For example, if the configuration bundle is stored in a folder called exported_config within a top level folder called Panorama, the syntax for each server type is: SCP server: /Panorama/exported_config FTP server: //Panorama/exported_config The following characters: .(period), +, { and }, /, -, _, 0-9, a-z, and A-Z. Spaces are not supported in the file Path.
Enable FTP Passive Mode	Select to use FTP passive mode.
Username	Specify the username required to access the target system.
Password / Confirm Password	Specify the password required to access the target system. Use a password with maximum length of 15 characters. If the password exceeds 15 characters, the test SCP connection will display an error because the firewall encrypts the password when it tries to connect to the SCP server and the length of the encrypted password can be up to 63 characters only.
Test SCP server connection	Select to test communication between Panorama and the SCP host/server. A pop-up window is displayed requiring you to enter a clear text Passwordand then to Confirm Password in order to test the SCP server connection and enable the secure transfer of data. If Panorama has an HA configuration, perform this step on each HA peer so that each one can successfully connect to the SCP server. If Panorama can successfully connect to the SCP server.

Panorama > Server Profiles > SCP

Panorama > Software