Objects > Security Profiles > Mobile Network Protection
Table of Contents
Expand all | Collapse all
-
- Firewall Overview
- Features and Benefits
- Last Login Time and Failed Login Attempts
- Message of the Day
- Task Manager
- Language
- Alarms
- Commit Changes
- Save Candidate Configurations
- Revert Changes
- Lock Configurations
- Global Find
- Threat Details
- AutoFocus Intelligence Summary
- Configuration Table Export
- Change Boot Mode
-
- Objects > Addresses
- Objects > Address Groups
- Objects > Regions
- Objects > Dynamic User Groups
- Objects > Application Groups
- Objects > Application Filters
- Objects > Services
- Objects > Service Groups
- Objects > Devices
- Objects > External Dynamic Lists
- Objects > Custom Objects > Spyware/Vulnerability
- Objects > Custom Objects > URL Category
- Objects > Security Profiles > Antivirus
- Objects > Security Profiles > Anti-Spyware Profile
- Objects > Security Profiles > Vulnerability Protection
- Objects > Security Profiles > File Blocking
- Objects > Security Profiles > WildFire Analysis
- Objects > Security Profiles > Data Filtering
- Objects > Security Profiles > DoS Protection
- Objects > Security Profiles > Mobile Network Protection
- Objects > Security Profiles > SCTP Protection
- Objects > Security Profile Groups
- Objects > Log Forwarding
- Objects > Authentication
- Objects > Packet Broker Profile
- Objects > Schedules
-
-
- Firewall Interfaces Overview
- Common Building Blocks for Firewall Interfaces
- Common Building Blocks for PA-7000 Series Firewall Interfaces
- Tap Interface
- HA Interface
- Virtual Wire Interface
- Virtual Wire Subinterface
- PA-7000 Series Layer 2 Interface
- PA-7000 Series Layer 2 Subinterface
- PA-7000 Series Layer 3 Interface
- Layer 3 Interface
- Layer 3 Subinterface
- Log Card Interface
- Log Card Subinterface
- Decrypt Mirror Interface
- Aggregate Ethernet (AE) Interface Group
- Aggregate Ethernet (AE) Interface
- Network > Interfaces > VLAN
- Network > Interfaces > Loopback
- Network > Interfaces > Tunnel
- Network > Interfaces > SD-WAN
- Network > Interfaces > PoE
- Network > Interfaces > Cellular
- Network > Interfaces > Fail Open
- Network > VLANs
- Network > Virtual Wires
-
- Network > Routing > Logical Routers > General
- Network > Routing > Logical Routers > Static
- Network > Routing > Logical Routers > OSPF
- Network > Routing > Logical Routers > OSPFv3
- Network > Routing > Logical Routers > RIPv2
- Network > Routing > Logical Routers > BGP
- Network > Routing > Logical Routers > Multicast
-
- Network > Routing > Routing Profiles > BGP
- Network > Routing > Routing Profiles > BFD
- Network > Routing > Routing Profiles > OSPF
- Network > Routing > Routing Profiles > OSPFv3
- Network > Routing > Routing Profiles > RIPv2
- Network > Routing > Routing Profiles > Filters
- Network > Routing > Routing Profiles > Multicast
- Network > Proxy
-
- Network > Network Profiles > GlobalProtect IPSec Crypto
- Network > Network Profiles > IPSec Crypto
- Network > Network Profiles > IKE Crypto
- Network > Network Profiles > Monitor
- Network > Network Profiles > Interface Mgmt
- Network > Network Profiles > QoS
- Network > Network Profiles > LLDP Profile
- Network > Network Profiles > SD-WAN Interface Profile
- Network > Network Profiles > MACsec Profile
-
-
- Device > Setup
- Device > Setup > Management
- Device > Setup > Interfaces
- Device > Setup > Telemetry
- Device > Setup > Content-ID
- Device > Setup > WildFire
- Device > Setup > ACE
- Device > Setup > DLP
- Device > Log Forwarding Card
- Device > Config Audit
- Device > Administrators
- Device > Admin Roles
- Device > Access Domain
- Device > Authentication Sequence
- Device > IoT Security > DHCP Server Log Ingestion
- Device > Device Quarantine
-
- Security Policy Match
- QoS Policy Match
- Authentication Policy Match
- Decryption/SSL Policy Match
- NAT Policy Match
- Policy Based Forwarding Policy Match
- DoS Policy Match
- Routing
- Test Wildfire
- Threat Vault
- Ping
- Trace Route
- Log Collector Connectivity
- External Dynamic List
- Update Server
- Test Cloud Logging Service Status
- Test Cloud GP Service Status
- Device > Virtual Systems
- Device > Shared Gateways
- Device > Certificate Management
- Device > Certificate Management > Certificate Profile
- Device > Certificate Management > OCSP Responder
- Device > Certificate Management > SSL/TLS Service Profile
- Device > Certificate Management > SCEP
- Device > Certificate Management > SSL Decryption Exclusion
- Device > Certificate Management > SSH Service Profile
- Device > Response Pages
- Device > Server Profiles
- Device > Server Profiles > SNMP Trap
- Device > Server Profiles > Syslog
- Device > Server Profiles > Email
- Device > Server Profiles > HTTP
- Device > Server Profiles > NetFlow
- Device > Server Profiles > RADIUS
- Device > Server Profiles > SCP
- Device > Server Profiles > TACACS+
- Device > Server Profiles > LDAP
- Device > Server Profiles > Kerberos
- Device > Server Profiles > SAML Identity Provider
- Device > Server Profiles > DNS
- Device > Server Profiles > Multi Factor Authentication
- Device > Local User Database > Users
- Device > Local User Database > User Groups
- Device > Scheduled Log Export
- Device > Software
- Device > Dynamic Updates
- Device > Licenses
- Device > Support
- Device > Policy Recommendation > IoT
- Device > Policy > Recommendation SaaS
- Device > Policy Recommendation > IoT or SaaS > Import Policy Rule
-
- Device > User Identification > Connection Security
- Device > User Identification > Terminal Server Agents
- Device > User Identification > Group Mapping Settings
- Device > User Identification> Trusted Source Address
- Device > User Identification > Authentication Portal Settings
- Device > User Identification > Cloud Identity Engine
-
- Network > GlobalProtect > MDM
- Network > GlobalProtect > Clientless Apps
- Network > GlobalProtect > Clientless App Groups
- Objects > GlobalProtect > HIP Profiles
-
- Use the Panorama Web Interface
- Context Switch
- Panorama Commit Operations
- Defining Policies on Panorama
- Log Storage Partitions for a Panorama Virtual Appliance in Legacy Mode
- Panorama > Setup > Interfaces
- Panorama > High Availability
- Panorama > Firewall Clusters
- Panorama > Administrators
- Panorama > Admin Roles
- Panorama > Access Domains
- Panorama > Device Groups
- Panorama > Plugins
- Panorama > Log Ingestion Profile
- Panorama > Log Settings
- Panorama > Server Profiles > SCP
- Panorama > Scheduled Config Export
- Panorama > Device Registration Auth Key
Objects > Security Profiles > Mobile Network Protection
The Mobile Network Protection profile enables the firewall to inspect GTP and HTTP/2 in
5G Service Based Architecture (SBA) traffic. To view this profile, you must enable GTP
Security in Device > Setup >
Management.
Use the options in this profile to enable stateful inspection of 5G HTTP/2, GTP v1-C, GTP
v2-C, GTP-U, and PFCP, to enable protocol validation for GTPv1-C, GTP v2-C, and GTP-U,
and to enable GTP-U content inspection to scan user data within GTP-U tunnels. It also
enables you to filter GTP sessions based on APN, IMSI/IMSI-Prefix, and RAT, and to
prevent end-user IP address spoofing.
GTP Inspection Profile Settings | |
---|---|
GTP Inspection | |
GTP-C |
|
GTP-U | Enabling stateful inspection for either GTPv1-C and/or GTPv2-C
automatically enables GTPU-U stateful inspection. You can specify the following validity checks for GTP-U payloads.
In addition you can also configure an allow, block or alert action
for:
|
5G-C | For 5G, enable 5G-HTTP2 to enable inspection
of 5G HTTP/2 control packets, which can contain subscriber IDs,
equipment IDs, and network slice information. This allows you to
correlate subscriber ID (IMSI), equipment ID (IMEI), and network
slice ID information learned from HTTP/2 messages with the IP
traffic encapsulated in GTP-U packets.Enabling 5G-HTTP2 disables GTP-C for the
profile. |
PFCP | For Packet Forwarding Control Protocol (PFCP), enable
Stateful Inspection to inspect PFCP
traffic. When you enable stateful inspection for PFCP traffic, the
firewall inspects the traffic between the MEC and the remote or
central site to help prevent attacks such as Denial of Service (DOS)
or spoofing. If you enable this option, Actions for GTP-U End User IP Address
Spoofing are not available. You can specify the following state checks:
You can then specify the Action
(Allow , Alert , or
Block ) you want the firewall to take when
the check is unsuccessful. You can also select if you want the firewall to create a log at the
beginning or ending of the PFCP associations or sessions. |
Correlation | |
UEIP Correlation | Enables correlation and mapping of subscriber ID and equipment ID to
the User Equipment (UE) IP address. |
Mode |
|
Source | Select the source that you want the firewall to use to correlate the
control plane and user plane information for enforcement of
subscriber-level and equipment-level security policy. The firewall
inspects traffic for the source type you select to process and
extract 5G/4G identity information, such as subscriber ID (SUPI or
IMSI), equipment ID (PEI or IMEI) and the IP address of the user
equipment (UE), to correlate with 5G/4G subscriber IP traffic.
|
Log at UEIP Start | Log UEIP correlation events when the firewall allocates an IP address
to the UE. |
Log at UEIP End | Log UEIP correlation events when the firewall releases the allocated
IP address. |
Filtering Options | |
RAT Filtering | All Radio Access Technologies (RAT) are allowed by default. GTP-C
Create-PDP-Request and Create-Session-Request messages are filtered
or allowed based on the RAT filter. You can specify whether to
allow, block or alert on the following RAT that the user equipment
uses to access the mobile core network:
The following RAT are available when enabling
5G-HTTP2 :
|
IMSI Filtering | IMSI (International Mobile Subscriber Identity) is a unique
identification associated with a subscriber in GSM, UMTS and LTE
networks that is provisioned in the Subscriber Identity Module (SIM)
card. An IMSI is usually presented as a 15-digit number (8 bytes) but can
be shorter. IMSI is composed of three parts:
The IMSI Prefix combines the MCC and MNC and
allows you to allow ,
block , or alert
GTP traffic from a specific PLMN. By default all IMSI are
allowed.You can either manually enter or import a CSV file with IMSI or IMSI
prefixes into the firewall. The IMSI can include wildcards, for
example, 310* or 240011*. The firewall supports a maximum of 5,000 IMSI or IMSI prefixes. |
APN Filtering | The Access Point Name (APN) is a reference to a GGSN/ PGW that user
equipment requires to connect to the internet. In 5G, one format of
Data Network Name (DNN) is the APN. The APN is composed of one or
two identifiers:
All APNs are allowed by default. The APN filter enables you to allow,
block, or alert GTP traffic based on the APN value. GTP-C
Create-PDP-Request and Create-Session-Request messages are filtered
or allowed based on the rules defined for APN filtering. You can manually add or import an APN filtering list into the
firewall. The value for the APN must include the network ID or the
domain name of the network (for example, example.com) and,
optionally, the operator ID. For APN filtering, the wildcard '*' allows you to match for all APN.
A combination of '*' and other characters is not supported for
wildcards. For example, "internet.mnc* " is treated as a regular APN
and will not filter all entries that start with internet.mnc. The firewall supports a maximum of 1,000 APN filters. |
GTP Tunnel Limit | |
Max Concurrent Tunnels Allowed per Destination | Allows you to limit the maximum number of GTP-U tunnels to a
destination IP address, for example to the GGSN (range is 0 to
100,000,000 tunnels) |
Alert at Max Concurrent Tunnels per Destination | Specify the threshold at which the firewall triggers an alert when
the number of maximum GTP-U tunnels to a destination have been
established. A GTP log message of high severity is generated when
the configured tunnel limit is reached. |
Logging frequency | The number of events that the firewall counts before it generates a
log when the configured GTP tunnel limits are exceeded. This setting
allows you to reduce the volume to messages logged (range is 0 to
100,000,000; default is 100). |
Overbilling Protection | Select the virtual system that serves as the Gi/ SGi firewall on your
firewall. The Gi/ SGi firewall inspects the mobile subscriber IP
traffic traversing over the Gi/ SGi interface from the PGW/ GGSN to
the external PDN (packet data network) such as the internet and
secures internet access for mobile subscribers. Overbilling can occur when a GGSN assigns a previously used IP
address from the End User IP address pool to a mobile subscriber.
When a malicious server on the internet continues to send packets to
this IP address as it did not close the session initiated for the
previous subscriber and the session is still open on the Gi
firewall. To disallow data from being delivered, whenever a GTP
tunnel is deleted (detected by delete-PDP or delete-session message)
or timed-out, the firewall enabled for overbilling protection
notifies the Gi/ SGi firewall to delete all the sessions that belong
to the subscriber from the session table. GTP Security and SGi/ Gi
firewall should be configured on the same physical firewall, but can
be in different virtual systems. To delete sessions based on GTP-C
events, the firewall needs to have all the relevant session
information and this is possible only when you manage traffic from
the SGi + S11 or S5 interfaces for GTPv2 and Gi + Gn interfaces for
GTPv1 in the mobile core network. |
Other Log Settings By default the
firewall does not log allowed GTP or PFCP messages. You can
selectively enable logging of allowed GTP and PFCP messages for
troubleshooting when needed as it will generate a high volume of
logs. In addition to allowed log messages, this tab also allows you
to selectively enable logging of user location
information. | |
GTPv1-C Allowed Messages | Allows you to selectivity enable logging of the allowed GTPv1-C
messages, if you have enabled stateful inspection for GTPv1?C. These
messages generate logs to help you troubleshoot issues as
needed. By default, the firewall does not log allowed messages. The logging
options for allowed GTPv1-C messages are:
|
Log User Location | Enables you to include the user location information, such as area
code and Cell ID, in GTP logs. |
Packet Capture | Enables you to capture GTP events. |
GTPv2-C Allowed Messages | Enables you to selectively enable logging of the allowed GTPv2-C
messages if you enabled stateful inspection for GTPv2-C. These
messages generate logs to help you troubleshoot issues as
needed. By default, the firewall does not log allowed messages. The logging
options for allowed GTPv2-C messages are:
|
GTP-U Allowed Messages | Enables you to selectively enable logging of the allowed GTP-U
messages if you enabled stateful inspection for GTPv2-C or GTPv1-C.
These messages generate logs to help you troubleshoot issues as
needed. The logging options for allowed GTP-U messages are:
|
G-PDU Packets Logged per New GTP-U Tunnel | Enable this option to verify that the firewall is inspecting GTP-U
PDUs. The firewall generates a log for the specified number of G-PDU
packets in each new GTP-U tunnel (range is 1 to 10; default is
1). |
5G-C Allowed Messages | Select N11 to selectively enable logging of
allowed N11 messages. N11 messages help you with troubleshooting and
provide deeper visibility into the HTTP/2 messages exchanged over an
N11 interface for different procedures. This field is available only
if you enabled 5G-HTTP2 on the
5G-C tab in the Mobile Network Protection
profile. |
PFCP Allowed Messages | Allows you to selectively enable logging of the allowed PFCP messages
if you enabled stateful inspection for PFCP. These messages generate
logs to help you troubleshoot issues as needed. The logging options for allowed PFCP messages are:
|