Administrative Access Per Virtual System or Firewall
If you have a superuser administrative account, you can create and configure granular permissions for a vsysadmin or device admin role.
- Create an Admin Role Profile that grants or disables permission to an Administrator to configure or read-only various areas of the web interface.
- SelectandDeviceAdmin RolesAddanAdmin Role Profile.
- Enter aNameand optionalDescriptionof the profile.
- ForRole, specify which level of control the profile affects:
- Device—The profile allows the management of the global settings and any virtual systems.
- Virtual System—The profile allows the management of only the virtual system(s) assigned to the administrator(s) who have this profile. (The administrator will be able to access, but not theDeviceSetupServicesVirtual SystemsGlobaltab.)
- On theWeb UItab for the Admin Role Profile, scroll down toDevice, and leave the green check mark (Enable).
- UnderDevice, enableSetup. UnderSetup, enable the areas to which this profile will grant configuration permission to the administrator, as shown below. (The Read Only lock icon appears in the Enable/Disable rotation if Read Only is allowed for that setting.)
- Management—Allows an admin with this profile to configure settings on theManagementtab.
- Operations—Allows an admin with this profile to configure settings on theOperationstab.
- Services—Allows an admin with this profile to configure settings on theServicestab. An admin must haveServicesenabled in order to access thetab. If theDeviceSetup ServicesVirtual SystemsRolewas specified asVirtual Systemin the prior step,Servicesis the only setting that can be enabled under.DeviceSetup
- Content-ID—Allows an admin with this profile to configure settings on theContent-IDtab.
- WildFire—Allows an admin with this profile to configure settings on theWildFiretab.
- Session—Allows an admin with this profile to configure settings on theSessiontab.
- HSM—Allows an admin with this profile to configure settings on theHSMtab.
- (Optional) Repeat the entire step to create another Admin Role profile with different permissions, as necessary.
- Apply the Admin role profile to an administrator.
- Select, clickDeviceAdministratorsAddand enter theNameto add an Administrator.
- (Optional) Select anAuthentication Profile.
- (Optional) SelectUse only client certificate authentication (Web)to have bi-directional authentication; to get the server to authenticate the client.
- Enter aPasswordandConfirm Password.
- (Optional) SelectUse Public Key Authentication (SSH)if you want to use a much stronger, key-based authentication method using an SSH public key rather than just a password.
- ForAdministrator Type, selectRole Based.
- ForProfile, select the profile that you just created.
- (Optional) Select aPassword Profile.
- Save the configuration.ClickCommitandOK.
Recommended For You
Recommended videos not found.