End-of-Life (EoL)

Refresh or Restart an IKE Gateway or IPSec Tunnel

Restart an IKEv2 gateway has a result different from restarting an IKEv1 gateway.
  • Refresh or restart an IKE gateway.
    1. Select
      Network
      IPSec Tunnels
      and select the tunnel for the gateway you want to refresh or restart.
    2. In the row for that tunnel, under the Status column, click
      IKE Info
      .
    3. At the bottom of the IKE Info screen, click the action you want:
      • Refresh
        —Updates the statistics on the screen.
      • Restart
        —Clears the SAs, so traffic is dropped until the IKE negotiation starts over and the tunnel is recreated.
  • Refresh or restart an IPSec tunnel.
    You might determine that the tunnel needs to be refreshed or restarted because you use the tunnel monitor to monitor the tunnel status, or you use an external network monitor to monitor network connectivity through the IPSec tunnel.
    1. Select
      Network
      IPSec Tunnels
      and select the tunnel you want to refresh or restart.
    2. In the row for that tunnel, under the Status column, click
      Tunnel Info
      .
    3. At the bottom of the Tunnel Info screen, click the action you want:
      • Refresh
        —Updates the onscreen statistics.
      • Restart
        —Clears the SAs, so traffic is dropped until the IKE negotiation starts over and the tunnel is recreated.

Recommended For You