End-of-Life (EoL)
Use the following table to quickly locate commands for common networking tasks:
If you want to . . . Use . . .
General Routing Commands
Display the routing table > show routing route
Look at routes for a specific destination > show routing fib virtual-router <name> | match <x.x.x.x/Y>
Show the NAT policy table > show running nat-policy
Test the NAT policy > test nat-policy-match
Show NAT pool utilization > show running ippool > show running global-ippool
Show IPSec counters > show vpn flow
Show a list of all IPSec gateways and their configurations > show vpn gateway
Show IKE phase 1 SAs > show vpn ike-sa
Show IKE phase 2 SAs > show vpn ipsec-sa
Show a list of auto-key IPSec tunnel configurations > show vpn tunnel
Show BFD profiles > show routing bfd active-profile [<name>]
Show BFD details > show routing bfd details [interface <name>] [local-ip <ip>] [multihop] [peer-ip <ip>] [session-id] [virtual-router <name>]
Show BFD statistics on dropped sessions > show routing bfd drop-counters session-id <session-id>
Show counters of transmitted, received, and dropped BFD packets > show counter global | match bfd
Clear counters of transmitted, received, and dropped BFD packets > clear routing bfd counters session-id all | <1-1024>
Clear BFD sessions for debugging purposes > clear routing bfd session-state session-id all | <1-1024>
Set the native VLAN ID > set session pvst-native-vlan-id <vid>
Drop all STP BPDU packets > set session drop-stp-packet
Verify PVST+ BPDU rewrite configuration, native VLAN ID, and STP BPDU packet drop > show vlan all
Show counter of times the 802.1Q tag and PVID fields in a PVST+ BPDU packet do not match > show counter global Look at the flow_pvid_inconsistent counter.
Ping from the management (MGT) interface to a destination IP address > ping host <destination-ip-address>
Ping from a dataplane interface to a destination IP address > ping source <ip-address-on-dataplane> host <destination-ip-address>
Show network statistics > request netstat statistics yes

Recommended For You