1. Home
    2. PAN-OS
    3. PAN-OS® Web Interface Reference Guide
    4. Dashboard
    End-of-Life (EoL)
    Previous
    Next
    The Dashboard widgets show general firewall or Panorama information, such as the software version, the operational status of each interface, resource utilization, and up to 10 entries in the threat, configuration, and system logs. Log entries from the last 60 minutes are displayed. All of the available widgets are displayed by default, but each administrator can remove and add individual widgets, as needed.
    Click Refresh ( ) to update the Dashboard or an individual widget. To change the automatic refresh interval, select an interval ( 1 min, 2 mins, 5 mins, or Manual). To add a widget to the Dashboard, select a category and then the widget name from the Widgets drop-down. To delete a widget, click Delete ( ) in the title bar of the widget.
    Dashboard Widget Description
    Application Widgets
    Top Applications Displays the applications with the most sessions. The block size indicates the relative number of sessions (mouse-over the block to view the number), and the color indicates the security risk—from green (lowest) to red (highest). Click an application to view its application profile.
    Top High Risk Applications Similar to Top Applications, except that it displays the highest-risk applications with the most sessions.
    ACC Risk Factor Displays the average risk factor (1-5) for the network traffic processed over the past week. Higher values indicate higher risk.
    System Widgets
    General Information Displays the firewall or Panorama name, model, the Panorama CPU and RAM, PAN-OS® or Panorama software version, the IPv4 and IPv6 management IP information, the application, threat, and URL filtering definition versions, the current date and time, and the length of time since the last restart.
    Interfaces ( firewall only ) Indicates whether each interface is up (green), down (red), or in an unknown state (gray).
    System Resources Displays the Management CPU usage, Data Plane usage, and the Session Count, which displays the number of sessions established through the firewall or Panorama.
    High Availability If high availability (HA) is enabled, indicates the HA status of the local and peer firewall/Panorama—green (active), yellow (passive), or black (other). For more information about HA, refer to Device > Virtual Systems or Panorama > High Availability.
    Locks Shows configuration locks that administrators have set.
    Logged In Admins Displays the source IP address, session type (web interface or CLI), and session start time for each administrator who is currently logged in.
    Logs Widgets
    Threat Logs Displays the threat ID, application, and date and time for the last 10 entries in the Threat log. The threat ID is a malware description or URL that violates the URL filtering profile. Only entries from last 60 minutes are displayed.
    URL Filtering Logs Displays the description and date and time for the last 60 minutes in the URL Filtering log.
    Data Filtering Logs Displays the description and date and time for the last 60 minutes in the Data Filtering log.
    Config Logs Displays the administrator user name, client (web interface or CLI), and date and time for the last 10 entries in the Configuration log. Only entries from the last 60 minutes are displayed.
    System Logs Displays the description and date and time for the last 10 entries in the System log. Note that a “Config installed” entry indicates configuration changes were committed successfully. Only entries from the last 60 minutes are displayed.
    Previous
    Next

    Recommended For You

    Recommended Videos

    Recommended videos not found.

    © 2022 Palo Alto Networks, Inc. All rights reserved.

    Techdocs Logo