Related Documentation
Device
Device Use the following sections for field reference on basic system configuration and maintenance tasks on the firewall: Device > Setup Device > High Availability ...
Session Setup
Session Setup The session setup firewall performs the Layer2 through Layer 4 processing necessary to set up a new session. The session setup firewall also ...
Reference: HA Synchronization
Reference: HA Synchronization If you have enabled configuration synchronization on both peers in an HA pair, most of the configuration settings you configure on one ...
Troubleshoot Commit Failures
Troubleshoot Commit Failures If commit failures occur on Panorama, check for the following conditions: Symptom Condition Resolution Template or device group commit failure The ability ...
Save Candidate Configurations
Save Candidate Configurations Click Save at the top right of the web interface to create a snapshot file (.snapshot.xml) of the candidate configuration or to ...
NAT in Active/Active HA Mode
NAT in Active/Active HA Mode In an active/active HA configuration: You must bind each Dynamic IP (DIP) NAT rule and Dynamic IP and Port (DIPP) ...
Reboot or Shut Down Panorama
Reboot or Shut Down Panorama The reboot option initiates a graceful restart of Panorama. A shutdown halts the system and powers it off. To restart ...
HA Concepts
HA Concepts The following topics provide conceptual information about how HA works on a Palo Alto Networks firewall: HA Modes HA Links and Backup Links ...